Jovie 70-AB7L-ML-LR / 5600-6800-730 8G1 ET, Jovie 70 CLO (normal) lens anthracite ET 56W 6800lm 70 asym. wide-radiant (AB7L) IP66 IK09 5 SDCM

Mast lamps Jovie 70 CLO (normal) Lens anthracite ET 56W 6800lm 70 asym. wide-radiant (AB7L) IP66 IK09 5 SDCM

Versatile mast external light in reduced, international form language and flat design. With intelligent label for quick call of light information using QR code. With power reduction via control phase. The switch off of a control phase causes the light current to be set to 50%. In combination with the separately ordered mast attachment, use as a mast support lamp (zopf measure Ø 76 mm / Ø 60 mm) or a mast set lamp (zopf measure Ø 42 mm / Ø 60 mm). The tilt of the lamp head is adjustable. Stitch angle for assembly of the device o °, -5 °, -10 °, tilt angle for assembly of the device 0 °, 5 °, 10 °, 15 °. In MLT version (multi-lens technology), consisting of high-efficiency, UV and temperature-resistant lens systems in four-fold arrangement. With asymmetrical wide luminous intensity distribution. For the lighting of roads according to M5 and M6 lighting classes, a road width to light point height ratio of 0.4 to 0.8. Further radiation characteristics are available for flexible adaptation to customer-specific lighting tasks. Light current and light colour fixed, with light current constant at the end of the life (CLO). LED system consisting of 8 MLT LED modules with 4 LED each. Rated light current 6800 lm - 6800 lm, Ra > 70. Paint site tolerance (initial MacAdam)? 5 SDCM. Other LED light colours available on request. Mean L80 (tq 25 ° C) = 100,000 h The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Lamp with adjustable light current, reduction up to 50%, by app and NFC (Near Field Communication). In the delivery state the upper limit of the lamp is set. Aluminium die-cast luminaire. Surface anthracite coated (similar to DB 703). Light housing high-weather powder coated. Sea weather suitable coating on request. With PMMA lens, printed. The lens can be individually printed on the customer's request. Visible label protected from weather effects behind the lens on request. Mast available on request. Protection class (EN 61140): II, protection type (DIN EN 60529): IP66, shock strength according to IEC 62262: IK09. Permissible ambient temperature (ta): 25 ° C Weight: 8.9 kg. The lamp is connected without opening the lamp body through the external connection line. Length of the connection line: 12.0 m. With electronic operating equipment, switchable. Operating equipment according to DALI-2 standard (EN 62386). The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Shock voltage resistance Differential mode / Common mode: 6 kV / 10 kV. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.