LIQ 50N-AB2L-LR / 1650-722 2G1 ET, Luminous Lamps Lumega IQ 50N CLO (normal) Lens grey ET 16W 1650lm 70 asym. wide-radiant (AB2L) IP66 IK08 5 SDCM

Lamps for fattening Lumega IQ 50N CLO (normal) lens grey ET 16W 1650lm 70 asym. wide-radiant (AB2L) IP66 IK08 5 SDCM

LED support and approach lamp with clear lines and attractive silhouette. With intelligent label for quick call of light information using QR code. With power reduction via control phase. The switch off of a control phase causes the light current to be set to 50%. Attachment and attachment mounting on or at mast-head Ø 76 mm. Angle angle 0 °... 90 °, adjustable in 5 ° steps, scaled. Easily and quickly adjustable from the top to the top lamp by means of a screw accessible from the outside. Mounting on walls is possible via a separate accessory. The mounting is made of stainless steel with two fastening screws according to EN 60598-2-3. Using separately to order reduction pieces also suitable for mounting on masts with zopf Ø 42, 48 and 60 mm. Matching mast on request. In MLT version (multi-lens technology), consisting of high-efficiency, UV and temperature-resistant lens systems in four-fold arrangement. With asymmetrical wide luminous intensity distribution. Further radiation characteristics are available for flexible adaptation to customer-specific lighting tasks. The subsequent installation of a back / side shielding is possible as an accessory to be ordered separately. Light current and light colour fixed, with light current constant at the end of the life (CLO). LED system consisting of 2 MLT LED modules with 4 LED each. Rated light current 1650 lm, measuring power 15 W, maximum light output 110 lm / W light color hot white, similar colour temperature (CCT) 2200 K, general colour rendering index (CRI) Ra > 70. Paint site tolerance (initial MacAdam)? 5 SDCM. Mean L80 (tq 25 ° C) = 100,000 h The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). The rated light current of the lamp can be reduced by 50% by the app and NFC (Near Field Communication). In the delivery state 100% of the rated light current is set. Aluminium die-cast luminaire. Point of rotation from UV and weather-resistant ASA. The lamp body (primary colour) and the point of rotation (additional colour) are removed in colour. Primary colour anthracite (similar to DB 703), additional color silver grey (similar to RAL 9006). With metal effect, high-weather. The mounting elements are coated in case colour. Tool-free, VG-room cover made of aluminium die-cast, to be opened with a knee lever. The E-block can be removed without tools. The interchangeable cover of heat-treated single-disc safety glass is securely attached to the lamp housing with four stainless steel fasteners. The cover is equipped with a durable, UV-resistant polyurethane seal. Sea weather suitable coating on request. Mast available on request. Protection class (EN 61140): II, protection type (DIN EN 60529): IP66, shock strength according to IEC 62262: IK08. Permissible ambient temperature (ta): -40 ° C to 25 ° C. Weight: 6,9 kg. With connected 8000 mm long supply line. With electronic operating equipment, switchable. Operating equipment according to DALI-2 standard (EN 62386). The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Lamp with adjustable light current, reduction up to 50%, by app and NFC (Near Field Communication). Shock voltage resistance Differential mode / Common mode: 6 kV / 10 kV. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.