Creavo M37 LW19-03 42-840 ETDD X4 01, fitted lights Creavo C lens white ETDD 26W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM

Appliances Creavo C lens white ETDD 26W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM

Rectangular LED ceiling installation lamp with light elements made of lens systems and cubic deflection elements and high efficiency. M37 (185 mm x 1250 mm). With integrated LiveLink sensor for connection to a LiveLink control unit for day-light control and presence recording. LiveLink sensor Tridonic Msensor G3 PIR 5DPI for day-to-day control and presence recording. Constant light control with a shutdown function with sufficient daylight. Passive infrared presence sensor, with highly sensitive multisegment pyrosensors, with adjustable shutdown time, either in automatic operation (automatic on, automatic off) or semi-automatic operation (automatic off, manual on). Special IQ mode for automatic adaptation of the after-life to space use Special IQ mode for automatic adaptation of the after-life to space use. Connection and electrical supply via the DALI interface of the LiveLink control unit. Number of DALI participants: 5. Coverage range: Ø 4.5 m, mounting height 2.5 m - 5 m. For use in system ceilings with visible support rails and in conjunction with an accessories to be ordered separately, also suitable for installation in system ceilings with covered support rails and sawn ceiling openings (Creavo / opendo ZBB, 1144900) or for installation in panel ceilings module 100 (Creavo / opendo M36 / 37 Paneel M100, 8498400 or Creavo / opendo M38 / 39 Paneel M100, 8498500). The assembly in sawn openings using mounting accessories requires a ceiling material thickness of min. 18 mm. Further information on the mounting of the lamp and its mounting can be taken from the assembly instructions. The optical system with a precise combination of LED lenses and dipped elements creates a very high visual comfort with very high lighting performance. With symmetrically limited wide luminous intensity distribution. Radiation angle 79 °. Binding assessment according to UGRs classification (EN 12464-1) < 19. Screen-friendly according to EN 12464-1 by limited light density L? 3000 cd / m2 for radiating angles above 65 ° around. Light current and light color fixed. With 18 light elements, rectangular (1 x 18). Measured light current 4200 lm, measuring power 26 W, maximum light output 162 lm / W light color neutral white, similar colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Color site tolerance (initial MacAdam)? 3 SDCM. Mean L80 (tq 25 ° C) = 100,000 h., mean L90 (tq 25 ° C) = 50,000 h. The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Lamp made of sheet steel. White coated surface (similar to RAL 9016). Slip-off crates silver grey, with fine surface structure (RAL 7001). Dimensions (L x B): 1247 mm x 184 mm, lamp height 90 mm. The drop-off boxes can be executed on request in other RAL colours. The colour of the dipped-off crates has no relevant influence on the light characteristics of the lamp. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, shock strength according to IEC 62262: IK03, test temperature filament wire test according to IEC 60695-2-11: 650 ° C. Permissible ambient temperature (ta): 25 ° C. Weight: 7,0 kg. Lamps equipped with Linect ® lamp connection system. With electronic operating equipment, digital dimmable (DALI). Operating equipment according to DALI-2 standard (EN 62386). Lamp can be switched and dimmable via DALI control clamps (Touch DIM). The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Operating equipment is legible and protected from misconnection, short circuit, overload and overtemperature. Output ripple of the operating unit? 4% for effective control of the LED system and flicker-free light. The lamp is monitoring ready (MOR) and provides light data for monitoring or forward-looking maintenance. It is compatible with the TRILUX monitoring services. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. The lamp is part of a range of mounting, mounting and hanging lamps that are aligned in the appearance. Project-specific versions with varying luminaires are possible on request. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.