Tugra 15 PL 50-840 ET IP69K 23, Moisture lamps Tugra prisms grey tube-shaped ET 38W 5000lm Lambertian (L) IP69 (80 ° C) IK03 3 SDCM

Moisture lamps Tugra Prisms grey tube-shaped ET 38W 5000lm Lambertian (L) IP69 (80 ° C) IK03 3 SDCM

Multivariable and modern tube lamp with 75 mm profile diameter. Suitable for use in HACCP, IFS and / or BRC Global Standard Food certified companies. Light in PMMA design due to the higher UV resistance suitable for use in uncovered outdoor areas. With limited surface temperature, suitable for use in fire-prone rooms according to DIN EN 60598-2-24. For wall and ceiling mounting. Standard stainless steel assembly clips (2 pieces, V2A) with triangle included. Optional accessories allow for further assembly concepts. For individual applications. The continuous assembly of the lamp body allows very high flexibility in the position of the mounting points. The packaging is made of recyclable cardboard, non-plastic. Multiple packaging with 28 lamps and project packaging with 108 lamps per packaging unit also reduce the general resource consumption in the overall process. Optical cylinder profile with a light-acting prism structure as secondary. With lambertic light intensity distribution. With mainly direct light intensity distribution. With a slight indirect part for surface whitening. Light current and light color fixed. Measured light current 5000 lm, measuring power 38 W, maximum light output 132 lm / W light color neutral white, similar colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Color site tolerance (initial MacAdam)? 3 SDCM. Mean L80 (tq 25 ° C) = 50,000 h. Gas-tight light profile made of PMMA. End cap with high-quality, matt surface structure and surface quality according to VDI30 from ASA. Color of the end caps grey (similar to RAL 7035). Do not disassemble or open end caps. Lamp length 1505 mm, lamp height 81 mm, Ø lamp body 81 mm. The device carrier is fixed to the lamp profile with transparent devices to prevent shadow formation. Protection class (EN 61140): I, protection type (DIN EN 60529): IP69 (80 ° C) corresponds to the previously declared protection type IP69K, shock strength level according to IEC 62262: IK03, test temperature filament wire test according to IEC 60695-2-11: 650 ° C. Permissible ambient temperature (ta): -25 ° C to 35 ° C. Weight: 2,6 kg. Connection via an external 3-pin line (3000 mm). With electronic operating equipment, switchable. The ENEC certification by an independent verifier is in preparation. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. Lamp available 10 years after the invoice date, subject to reasonable changes that serve progress. Spare parts (LED module, operating equipment, optical system) are not available due to design.