LnPlus 40-AM19L-SLR2 / 2200-722 2G1 ET, Lumena Plus 40 CLO (normal) lens grey ET 23W 2200lm 70 asym. medium-wide str. (AM19L) IP66 IK09 5 SDCM

Headlamps Lumena Plus 40 CLO (normal) lens grey ET 23W 2200lm 70 asym. medium width str. (AM19L) IP66 IK09 5 SDCM

LED floodlight radiator for surface lighting. With SLR (Smart Lighting Ready) equipment for the subsequent integration of components for light management systems. The standard base according to Zhaga are attached to the lamp head above and to the lower cover. The lamp is designed for the D4I standard and Zhaga / D4I certified. The lamp meets the requirements of EN 60598 and is designed for wind effects according to EN 1991 (Eurocode) with a base wind speed of up to 30m / s (corresponding to wind zone 4 in Germany) in the off-site category 1. Assembly ball made of aluminium pressure cast. The stable mounting ball with 3 holes allows for a 2-point fastening as well as a central 1-point fastening. Headlamps can be swivel by single-point mounting on the mounting ball. securing the turning position by interlinked locking. Headlamps and mounting balls are ready for delivery. Mounting for single and multiple applications by means of accessories possible. In MLT version (multi-lens technology), consisting of high-efficiency, UV and temperature-resistant lens systems in four-fold arrangement. With asymmetrical medium-wide light intensity distribution. Further radiation characteristics are available for flexible adaptation to customer-specific lighting tasks. Light current and light colour fixed, with light current constant at the end of the life (CLO). LED system consisting of 2 MLT LED modules with 4 LED each. Measured light current 2200 lm, measuring power 22 W, maximum light output 100 lm / W light color hot white, similar colour temperature (CCT) 2200 K, general colour rendering index (CRI) Ra > 70. Paint site tolerance (initial MacAdam)? 5 SDCM. Mean L80 (tq 25 ° C) = 100,000 h The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Lamp and end-disc carriers made of aluminium pressure cast. The lens of the single-disc safety glass is attached to the frame. Luminaire (primary colour) and support (additional colour) are removed in colour. Primary colour anthracite (similar to DB 703), additional color silver grey (similar to RAL 9006). Light housing high-weather powder coated. Further color variants according to RAL or DB color code are possible. Dimensions (L x B): 503 mm x 390 mm, height 250 mm. Bale-proof according to DIN 18032-3. Protection class (EN 61140): I, protection type (DIN EN 60529): IP66, shock strength according to IEC 62262: IK09. Permissible ambient temperature (ta): -40 ° C to 25 ° C. With electronic operating equipment, switchable. The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Shock voltage resistance Differential mode / Common mode: 6 kV / 10 kV. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.