ArimoFit G2 M84 DW19 42-8TW ETD8 03, fitted lamps Arimo Fit C HCL Diffuser Silver ETD8 40W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM

Appliances Arimo Fit C HCL Diffuser Silver ETDD8 40W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM

Square LED lamp with translucent cover DW. M84 (625 mm x 625 mm). The lamp can be optionally equipped with an emergency light system for the ceiling installation with an emergency light operating time of 3 hours. In the type of emergency light, the light current is 575 lm. Suitable for use in HACCP, IFS and / or BRC Global Standard Food certified companies. To create a deeper spatial effect. For system ceilings with visible support rails. The lamp body closes with the cover system on the room side. In combination with separate accessories to be ordered for sawn ceiling openings as well as for the cover floor assembly. The Skyframe, which is optionally available as an accessory, has a space-sensitive depth effect in the classic, flat module ceiling, the 3-dimensional contour of a skylight is reproduced. The optical system consists of a translucent, yellowing-free PMMA cover with high transmission level. The surface of the cover is smooth and free of visible, microprismatic structures. With symmetrically limited wide luminous intensity distribution. Radiation angle 68 °. Binding assessment according to UGRs classification (EN 12464-1) < 19. Screen-friendly according to EN 12464-1 by limited light density L? 3000 cd / m2 for radiating angles above 65 ° around. Harmonic light effect by uniformly illuminated light output. Individual design of the light-emitting surface (e.g. by printing) and other special solutions possible on request. With Tunable White technology for controlling the light color by means of a separate control system (DT8). LED panels are equipped with LED of light color hot white and day white. Rated light current 4200 lm, rated power 37 W, maximum light output 114 lm / W light color Tunable White (hot white - day light white), similar colour temperature (CCT) Tunable White (2700 K - 6000 K), general colour reproduction index (CRI) Ra > 80. Color site tolerance (initial MacAdam)? 3 SDCM. Mean L80 (tq 25 ° C) = 100,000 h., mean L90 (tq 25 ° C) = 50,000 h. The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Lamp body made of aluminium continuous pressure profile. Surface silver grey coated (similar to RAL 9006). Light dimensions (L x B x H): 620 mm, 620 mm, 22 mm. The surrounding edge of the frame profile facilitates assembly. The light frame 3-dimensional is profiled to create a depth effect in the ceiling. Lamp can be covered with insulation material at ta 25 ° C, ta35 ° C without insulation material also usable. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, protection type room-side: IP40, shock strength level according to IEC 62262: IK03, test temperature filament wire test according to IEC 60695-2-11: 650 ° C. Permissible ambient temperature (ta): 25 ° C. Weight: 3,7 kg. High-speed padding with power transmission up to ± 2,5 mm2. Connection of the ballast to the lamp by plug and play. The packaging concept of the lamp allows separate removal of the operating equipment for pre-assembly, the other components of the lamp remain protected until final assembly. With external, electronic control unit for switching, dimming and controlling the light color using DALI Device Type 8 capable control unit. Operating equipment according to DALI-2 standard (EN 62386). The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Operating equipment is legible and protected from misconnection, short circuit, overload and overtemperature. Output ripple of the operating unit? 4% for effective control of the LED system and flicker-free light. The ENEC certification by an independent verifier is in preparation. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. The lamp is part of a range of mounting, mounting and hanging lamps that are aligned in the appearance. The range of applications of the product range is further underlined by variants in the range of light current packages, light distribution curves and protection types. On request, the basic range can be extended with project-specific lighting features. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.