RS PRO 9m Grey/Yellow Cable Cover in Rubber, 14mm Inside dia.

SnapFit® BNC Cable Protectors

Each profile type consists of 2 separate compartments of differing size within one solid cable protector, designed to isolate power from low voltage cabling. Applications include, electronics computer rooms and any environment where power must run in tandem with any low voltage cabling. Made from flame retardant (to BS476, Part 7, class 3) and UV resistant rubber.

Each profile type consists of 2 separate compartments of differing size within one solid cable protector, designed to isolate power from low voltage cabling. Applications include, electronics computer rooms and any environment where power must run in tandem with any low voltage cabling. Made from flame retardant (to BS476, Part 7, class 3) and UV resistant rubber.

Prevents accidents caused by loose leadsLow smoke, non toxic and low fume emission levels in the event of a fire Fire retardant to European equivalent DIN 4102 part 1 and class B1 standardsTested for non-conductivity and conforms to BS903-C5 at 500 volts

Prevents accidents caused by loose leadsLow smoke, non toxic and low fume emission levels in the event of a fire Fire retardant to European equivalent DIN 4102 part 1 and class B1 standardsTested for non-conductivity and conforms to BS903-C5 at 500 volts

Note

"The widths of profiles BNC1, BNC2 and BNC3 are: BNC1 (30.83mm), BNC2 (40.88mm) and BNC3 (50.108mm)."

"The widths of profiles BNC1, BNC2 and BNC3 are: BNC1 (30.83mm), BNC2 (40.88mm) and BNC3 (50.108mm)."

The RS PRO Cable Protector of Snap Fit series are designed to protect loose cables from damage and for organisation, preventing trips or falls, making them ideal for office use. They are safe and simple to use, just 'snap' open the membrane in the base and push in the cables and lay flat.

The RS PRO Cable Protector of Snap Fit series are designed to protect loose cables from damage and for organisation, preventing trips or falls, making them ideal for office use. They are safe and simple to use, just 'snap' open the membrane in the base and push in the cables and lay flat.

Low lying profile with a ribbed top section to prevent slippingKeeps cables neat and tidyPrevents tripping and fallingProtects cables from damage of all types

Low lying profile with a ribbed top section to prevent slippingKeeps cables neat and tidyPrevents tripping and fallingProtects cables from damage of all types

Standards

BS 476 Part 7 Class 3; DIN 4102 Part 1 and Class B1; BS903-C5 at 500 V; ISO 9002

BS 476 Part 7 Class 3; DIN 4102 Part 1 and Class B1; BS903-C5 at 500 V; ISO 9002