ITT Cannon Trident Series Male Crimp Terminal, 16AWG Max

Crimp Two Piece Contacts

Note

To maintain IP67 rating wire insulation diameters should be within the following diameters: Signal wires: 1.7-2.7mm Power wires: 2.7-4mm.Use plier or ratchet style tool to crimp signal contacts. Use ratchet tool only to crimp power contacts.

To maintain IP67 rating wire insulation diameters should be within the following diameters: Signal wires: 1.7-2.7mm Power wires: 2.7-4mm.Use plier or ratchet style tool to crimp signal contacts. Use ratchet tool only to crimp power contacts.

ITT TNM Shielded

ITT TNM Shielded

The TNM connector range builds on the popular Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability.

The TNM connector range builds on the popular Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability.

RF shielding inherent in the full metal constructionBackshells enable cable braid termination so meeting EMC requirementsSignal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achievedIncludes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67Cable, chassis and jam nut configurations available in standard and reversed formatsOne, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types

RF shielding inherent in the full metal constructionBackshells enable cable braid termination so meeting EMC requirementsSignal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achievedIncludes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67Cable, chassis and jam nut configurations available in standard and reversed formatsOne, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types