WAGO 264 Series End and Intermediate Plate for Use with 264 Series Terminal Blocks

264 Miniature Series

Front-entry miniature screwless DIN Rail terminals are designed for snap-mounting onto symmetrical DIN Rail 467-349. The terminals have a clamp design that ensures the clamping force automatically adjusts to the size of the connector. Thus resulting in a corrosion-free contact area, and compensates for any deformation of the conductor due to cold flow or settling of strands.

Front-entry miniature screwless DIN Rail terminals are designed for snap-mounting onto symmetrical DIN Rail 467-349. The terminals have a clamp design that ensures the clamping force automatically adjusts to the size of the connector. Thus resulting in a corrosion-free contact area, and compensates for any deformation of the conductor due to cold flow or settling of strands.

Features and Benefits

• Available in 3 colours• Moulded in modified nylon 6.6 (free from halogen)• Self-extinguishing according to UL94-V2• Temperature stabilised allowing continuous operation at 105°C (170°C short term) according to IEC216 part 1 and 2• Terminals interlock and are designed to prevent reverse mounting• 24.5 mm Depth• Rated at 600 V (UL)• The green/yellow earth terminal blocks connect directly to the mounting rail

• Available in 3 colours• Moulded in modified nylon 6.6 (free from halogen)• Self-extinguishing according to UL94-V2• Temperature stabilised allowing continuous operation at 105°C (170°C short term) according to IEC216 part 1 and 2• Terminals interlock and are designed to prevent reverse mounting• 24.5 mm Depth• Rated at 600 V (UL)• The green/yellow earth terminal blocks connect directly to the mounting rail

Note

To ensure a high level of safety and security it is essential that only 1 conductor is inserted in each terminal. However, when jumper bars are used to common terminals a conductor of not more than 1.5mm² may be inserted between the jumper and the outer edge of the terminal block

To ensure a high level of safety and security it is essential that only 1 conductor is inserted in each terminal. However, when jumper bars are used to common terminals a conductor of not more than 1.5mm² may be inserted between the jumper and the outer edge of the terminal block

Approvals

UL recognised component, CSA certified, DEMKO (except 264-727), KEMA, SEMKO.

UL recognised component, CSA certified, DEMKO (except 264-727), KEMA, SEMKO.