MEG6710-0004, KNX universal dimmer LL REG-K / 4x230 / 250 W, light grey

Additionally available packaging sizes: 6

For switching and dimming of dimmable LED lamps, filament lamps, HV halogen lamps, NV halogen lamps via dimmable wrapped trafos or electronic trafos or dimmable compact fluorescent lamps. (phase and phase). With integrated bus coupler, screw clamps, short circuit, idle and overtemperature protection, lamp-efficient soft start. The connection of various external leaders is permitted. The dimactor automatically detects the connected load. This is done when switching on in the background. Combinations of ohm and inductive or ohm and capacitive loads can also be connected. Combinations of inductive and capacitive loads shall not be connected. No flickering of LEDs in turned off. For mounting on hat rails TH35 according to EN 60715. The bus connection is via a bus connection terminal. Software functions KNX dimming via KNX, dimming and emergency operation via hand switch, hand operation by bus release / lock. Dimming mode automatic or phase cut for certain LED / ESL / CFL light sources, load separation possible at the condition of OFF. Various dimming curves and dimming speeds, same dimming time, minimum / maximum dimming value, switching behaviour, memory function. 50% brightness when starting ESL / CFL light source, dim / value object switches channel, on / off delay. Stair light time function (with or without manual output function, non / retractable, time adding, pre-warning function), scenes (calling up to 8 internal brightness values), central function, links (AND / OR) or coercion. Blocking function (behaviour of the lock), feedback of the status state (switching state, brightness value, error), behaviour in the event of power recovery / bus recovery / download. Nominal voltage AC 220 - 230 V, 50 / 60 Hz. Channels 4 (different phases possible). rated power 4x250 W / VA. For 3 channels 1x350 W / VA and 2x250 W / VA. For 2 channels 2x350 W / VA. Minimum load / channel 4 W (ohmsch). 4 W (ohm-capacitive). 25 VA (ohm-inductive). Device width 8 TE corresponds to approx. 144 mm. Note information on the topic of dimming LED light sources is available on the Internet under Merten Dimmertest. http / / www.merten.de / Dimmer-Test.dimmertest.0.html. Scope of delivery With bus connection terminal and line cover. Colour light grey.