206905, Gira G1 PoE Gira G1 G Black

Gira G1 PoE Glass Black The Gira G1 is a multifunctional space control for the visualization and operation of a wide range of building functions. For use in the KNX system and in the Gira door communication system or as a client. The respective function range depends on the firmware used. Please refer to the Gira Onlinekatalog and the technical equipment documentation. Characteristics: The operation is carried out via a gesture-able multitouch display. Connection and communication is subject to variety via LAN or WLAN. Integrated speaker. Integrated microphone with echo compensation. Applications and combinations: The Gira G1 as a multifunctional room control unit provides the following functions or combinations of functions: KNX room control unit Video Client for the following systems Server - HomeServer - eNet - X1 security system Alarm Connect integration of Internet services properties as KNX room control device: Intuitively operated and customizable user interface by the end user. Switching, buttons, dimming (relative and absolute), dimming (including dimming RGB, RGBW and Tunable White), blinds and roller shutters, valuers, scene level. Status display, date and time display, inside and outside temperature display. Up to 150 functions (six function folders or rooms with up to 25 functions each). Up to 125 week time switches with 10 switching times each. Room temperature controller in combination with the optional temperature sensor module or KNX equipment for room temperature measurement, e.g. touch sensor 3 comfort. Operating modes: comfort, stand-by, night and frost Heat protection with own temperature values (for heating and / or cooling). Operating modes individually customizable. A heating clock as a week-time clock with 28 switching times. Room temperature control substation for the control of air conditioning systems (Fancoil) in connection with a KNX gateway for air conditioning systems. Supports KNX Data Secure and KNX IP Secure. Features as an apartment station Video: camera connection: targeted selection of the connected color cameras. Control of the door opener. Turn on and off Rufton. Rufton can be selected from 10 melodies. Properties as a housing station with SIP client: client function for SIP foreign systems of e.g. Comelite, TCS, SCHÜCO DCS Touch, 2N. SIP Direct calls or via registrar possible 64 intercalls possible e.g. for concierge early media support for video image integration of Internet services: Gira weather portal: display of weather forecast for up to five places (Internet connection required). The Gira G1 can also be used as a client for the following systems: HomeServer Client eNet-Client X1-Client Security System Alarm Connect The functions of the KNX room control device are not available in the client function. Please refer to the Gira Onlinekatalog and the technical equipment documentation. Gira G1 with PoE LAN subcleaning connection module. The power supply is made via the power over Ethernet. Data communication via LAN. Note: Suitable for indoor use only. Recommended mounting height: 150 cm from the floor. The installation is carried out on a deep device box (recommendation electronic box for LAN connection). The communication to the KNX installation is made only via the KNXnet IP standard. A KNX IP router must be used to connect the Gira G1 PoE to the KNX installation. Several Gira G1 can be operated on a KNX IP router. To connect the Gira G1 230 V or G1 24 V to the KNX installation, a Gira KNX IP router (from Firmwareversion 3) is required to ensure reliable communication in the WLAN. The Gira KNX IP router (from Firmwareversion 3) is specially equipped with the additional function Reliable data communication. Several Gira G1 can be operated on a Gira KNX IP router (from Firmwareversion 3). Commissioning in the KNX system from ETS 5.5 or higher. Can be used as a housing station in connection with TKS-IP gateway. When planning the system, please note the technical information on network planning in the device documentation. The Gira Project Wizard (GPA) is required for firmware updates. The GPA is available for free in the Gira download area. To use the time control tubes, either an Internet connection to an NTP time server or a corresponding KNX timer (e.g. Gira Weather Station Plus 2074 00) is required. The use of an electronic box is recommended for the installation of the PoE subcleaning connection module. It will be a commercially viable switch or Router or a PoE injector is required. We recommend the use of an electronic box for the installation of the PoE. It will be a commercially viable switch or Router or a PoE injector.