210127, object control button cutting. 4f KNX System 55

KNX object controller with button interface 4-fold system 55 pure white silk matt The Stetigler underplaster and the object controllers combine the functions of a KNX bus coupler, a room temperature regulator with a set value and the functions of a binary input. Features: Four potential-free contacts can be connected to the binary input. The input 1 can be used to connect a remote sensor for temperature measurement in the floor. Two inputs can be parametrized as outputs (max. 0.8 mA). The control function is used for room temperature control. The controller controls the current room temperature with an internal or external temperature sensor and processes it with an adjustable temperature should value to a position size. This can be used to control the actuators with a continuous control signal as well as with a switching control signal. Controller: 5 operating modes: comfort, stand-by, night, frost or heat protection and control lock (e.g. dew point operation). Heating and cooling functions: heating, cooling, heating and cooling, basic and additional heating, basic and additional cooling. Predefined control parameters for common heating or cooling units. can be switched off (dew point operation) or Controller or operation of the controller can be blocked. Valve protection function (valve is cyclic open every 24 hours). Type of control: steady PIs, PIs (PWM) and 2-point (one off). Temperature detection via an internal and or external sensor (mean value for large rooms). Inputs: Free assignment of the functions switching, dimming, blinds and valuers to the inputs. Sperroobject for blocking individual inputs. Behaviour for bus voltage return can be parametrized separately for each input. Telegram rate limitation. Function Switching: two independent switching objects available for each input and individually unlocked, command can be set independently at rising and falling flank (ON, OFF, UM, no reaction). Function Dimming: One-surface and two-surface operation, time between dimming and switching and step-up adjustable, telegram repetition and stop telegram possible. Function Jalousie: command adjustable at rising flank (no function, ON, AB, UM), operating concept parametable (step - move - step or move - step), time between short and long-term operation adjustable, lamellar adjustment time adjustable. Function Valuator and light-point level: flank (button as close, button as open, switch) and value can be parametrized at flank, value adjustment can be done at button over long key pressure for value-level, light-point level with or without storage function. Temperature sensor function: A channel of the button interface can be used as an external temperature sensor for the room temperature controller. Outputs: independent switching of the max. two outputs. Note: No separate bus coupler is necessary. When connecting the external inputs, the use of a switch terminal can is recommended. The object controller has no operating or display elements.