RBA-15-AS5-CAX-A1, 19 wall cabinet one piece 15HE / 495mm, full-glass door RAL7035

High design stability The housing has a robust welding structure. The high processing quality and the latest technologies ensure its great look. The wall distributor has a full-glare door as standard. On request, however, a full sheet or perforated door can also be delivered. Flexible door opening The hinge system allows the door to be opened by almost 180 °. The door can be easily removed. Tu-rschlossIt allows easy and fast access to the case. Adjustable vertical grid rails The pair of vertical 19 "grid rails can be adjusted in the cabinet depth by any step. This facilitates the installation of the components as well as the cable management. Outbreakable glandings In the upper, lower and rear part of the housing are cable inlets, which are equipped with breakable glandings. A protective edge and a brush bar for the dust seal of the cable insertion are part of the package. The RBA A6 * has six breakable openings for the use of the ventilation units • One-part 19" wall distributor with protection degree IP 30 • The case is attached directly to the wall. • Two adjustable vertical grid rails are part of the distributor. • Distribution structure: - compact welding design - full-glass door with 4 mm high safety glass. A full sheet or perforated door is also possible. • The maximum load capacity of the individual doors is 10 kg. • The minimum order thickness is 65 µm. • The cases are intended for the installation of data and telecommunications systems and their distribution systems. • The distribution frame and all removable parts (side and back walls, doors,...) are connected to grounding cables, which must be properly attached and inserted during the entire life of the cabinet. • In the bottom of the distributor there is a M8 screw as the main point of departure. • Cable inserts with breakable covers are located at the top and bottom of the back wall of the case as well as another in the roof and floor. • The A6 version has breakable openings in the roof and bottom of the housing for the use of fans.