DN-19 47U-8 / 10-1, DIGITUS 47HE network cabinet

DIGITUS 47HE network cabinet

47HE network cabinet, Unique 2244x800x1000 mm, color grey (RAL 7035) The DIGITUS ® Professional Unique series has been manufactured, designed and developed for the high requirements of the IT infrastructure. The network cabinets of the DIGITUS Unique series are available at different heights (22 - 47 HE), widths (60 / 80 cm) and depths (60 - 120 cm) - the delivery is mounted on a pallet Each data cabinet has mounting points for separately available fan modules in the roof - by default, the cabinets are on level feet, which can be replaced by optional rolls. Both the front door with large-scale safety glass and the double-wing steel back door are equipped with 1-point locking and 120 ° opening angle - the door stop is interchangeable - cable inlets in the roof and floor offer flexibility when laying network cables - the front and rear profile rails can be adjusted in depth (installation depth: 688 - 943 mm) - Network cabinets can be used as a distribution cabinet in the server room or in the floor distribution and offer space for 19 components, such as patch field, specialist floor, network switch or cable management. The Unique series network cabinets have been developed for the user-friendly installation of active and passive network components with a clean cabling. Each cabinet is made of up to 1.5 mm thick steel sheet and provides a very good stability due to special sheet bending technology as a robust steel structure. The colour is made by powder coating in the colours grey (RAL 7035) and black (RAL 9005). In the special case, a disassembly of the cabinets can be done to reach also difficult to access site. The doors can be easily disassembled, a door stop can be changed. The roof is equipped with a covered lid, including a Ventilation slots for improved air circulation. The roof is also prepared for the recording of a fan module for active ventilation. The network cabinets include 2 pairs (4 pieces) mounted 483 mm (19 ") profile rails inside. These are galvanized and marked with a height unit (can be counted in both directions). They can be adjusted in depth and are also connected with deep-stains in the closet to allow an intensive expansion with 483 mm (19") components. An important aspect of the installation is cable management. In the bottom of each cabinet there is a sliding cable inlet with a moosrubber seal. Carriers from 26HE are equipped with two rear cable inlets with brush bar above and below the back door. For cabinets with a width of 800 mm or more, the cable guide options are extended by additional inlets with brush bar left and right in the roof and floor. In addition, vertical cable guide channels with the left and right side of the 483 mm (19 ") profile rails are mounted in the front (for cabinets of 32HE and 800 mm width). An extensive range of accessories for cable alloy, special floors, etc. helps to meet many requirements of daily practice.