205127, moving. 2.20 m comfort KNX system 55 pure white m

Additionally available packaging sizes: 5

KNX motion detector kit 2.20 m comfort system 55 pure white silk matt features: mounting on bus coupler 3. Configure for motion detection (application guard) or for room monitoring (application detector). Evaluation of the brightness during active motion detection in the guard operation. Turn off the lighting when the brightness threshold is exceeded. Projectable number of motion impulses within a monitoring time in the reporting operation. Movement is recorded digitally over 2 PIRsectors. The sensitivity of the movement detection can be parametrized separately for the PIRsectors in stages. Integrated brightness sensor to determine the ambient brightness. Adapting the sensitivity via an input on the device or with an IR remote control PIR KNX (accessories). Evaluation of the measured brightness by up to three independent brightness limits. Display of the movement detection (permanent or only in the walking test). Up to 5 function blocks that can be configured to the application guardians, guardians with a switch-off brightness or a detector. Two output communication objects are available for each function block to send the switching and control commands to the KNX. Configurable functions: switching, stairwell function, dimming, scene level, temperature level, brightness level, operating mode switching, switching with forced position. Function block switch for bus-controlled switching between two function block groups. Switching of the mode of operation (OFF AUTO ON) of the first function block in running operation by pre-location operation or by communication object by pre-location operation at further KNX motion detectors via KNX button sensor or visualization. need-oriented blocking of individual function blocks over the KNX. Manual operation of the controlled KNX actorics and therefore a deactivation of the PIRautomatic is possible. A function block can determine the time after a last movement and send it to the KNX via a communication object. This function, for example, allows easy monitoring of personal movements in the care of the elderly or in a senior residence. The operation of the motion detection can be adjusted with the application of a guard or a guard with a switch-off brightness. The device can be used as a single, a main or a substation in the use of a guard or a guard with a switch-off brightness. Go test function to help with the planning and setting of the PIR coverage area. Integrated room temperature measurement. A 1-bit or 1-byte telegram is triggered when the bus coupler is pulled off. IR remote control PIR KNX (accessories) for the setting of functions of the first function block (damping level, sensitivity of the motion detection, motion evaluation and afterlife). Turn on and off the walk test function. Note: The motion detector is not suitable for alarm messages in VdS-compliant alarm systems. Also suitable for mounting height 1.1 m (reduced coverage).