204027, Move.m.auf. 1.10 m Standard KNX System 55

Additionally available packaging sizes: 5

KNX motion detector set 1.10 m standard system 55 pure white silk matt features: mounting on bus coupler 3. Configure for motion detection (application guard) or for room monitoring (application detector). Evaluation of the brightness during active motion detection in the guard operation. Turn off the lighting when the brightness threshold is exceeded. Projectable number of motion impulses within a monitoring time in the reporting operation. Movement is recorded digitally over 2 PIRsectors. The sensitivity of the movement detection can be parametrized separately for the PIRsectors in stages. Integrated brightness sensor to determine the ambient brightness. Adjustment of the sensitivity by a device's adjuster. Display of the movement detection (permanent or only in the walking test). A function block can be configured. Function block for the application guard, guard with off-speed or detector configurable. Two output communication objects are available to the function block to send the switching and control commands to the KNX. Configurable functions: switching, stairwell function, dimming, scene level, temperature level, brightness level, operating mode switching, switching with forced position. switching of the mode of operation (OFF AUTO ON) in the current operation by pre-location operation or by communication object by pre-location operation at further KNX motion detectors via KNX key sensor or Visualization. The function block can determine the time after a last movement and send it to the KNX via a communication object. This function, for example, allows easy monitoring of personal movements in the care of the elderly or in a senior residence. The operation of the motion detection can be adjusted with the application of a guard or a guard with a switch-off brightness. The device can be used as a single, a main or a substation in the use of a guard or a guard with a switch-off brightness. Go test function to help with the planning and setting of the PIR coverage area. Note: Suitable for indoor use only. The motion detector is not suitable for alarm messages in VdS-compliant alarm systems.