FDG71L-230V, radio DALI gateway

Radio DALI Gateway

Radio DALI gateway, bidirectional. Stand-by loss 2 watts. Assembly, for example, in intermediate ceilings and lamps. 252mm long, 46mm wide and 31mm deep. With cable train load. Supply voltage 230V at terminals N and L. At terminals DALI + / - 16V DC / 130mA are provided for up to 64 DALI devices. The FDG71L gateway controls DALI devices with EnOcean radio stations. The groups 0-15 can be controlled and the broadcast command can also be removed. In addition, the DALI scenes 0-15 can be controlled. DALI installations to be fully controlled with the FDG71L must therefore be configured in groups 0- 15. The configuration software or control modules are offered by well-known manufacturers of DALI components (e.g. Tridonic DALI XC). The FGD71L internally stores the dimming value for each of the groups 0-15 and provides this value as a feedback. The same feedback messages are generated as with a Fud71. The feedback of the device addresses in ascending order corresponds to the dimming values of the DALI groups 0-15. The feedback can be converted with PCT14 individually per group from dim value telegram (%) to button telegram (on / off). Thus, the feedback can be used to control actuators. The FDG71L fulfils the functions of the DALI master and the DALI power supply. Attention: The FDG71L is always a double-click when you have a manual entry! For CLR, a simple click is enough. A direction button or universal button with the same ID and the same key cannot be learned several times into different groups. It is always the last selected group. So a button can switch either one group or all groups with broadcast. A FBH can also be learned per group. In manual learning, this always works without any brightness. With PCT14 you can also set the brightness threshold. For the FBH of all groups, the delay time for the shutdown after non-movement can be set together in minutes (1.. 60). Default is three minutes.