FDH62NP-230V + FTKB, radio-extractor-control with window-door contact, 1 close 10A

Radio exhaust hood control with window door contact, 1 close 10A

Radio extractor control. 1 Clasp not free of potential 10A / 250V AC. Stand-by loss only 0.4 watts. For installation. 49x51mm, 20mm deep. The connection terminals are plug terminals for circuit cross-sections from 0.2mm ² to 2.5mm ². With the comfortable Tipp technology, up to 32 radio universal buttons and radio window contacts can be learned. Only sensors are allowed to report that the window is actually open or set at a angle. Otherwise there is a risk of poisoning! Bidirectional radio activated. Supply, switching and control voltage local 230V. Contact in the zero passage. Bistabile relays, so there is no coil loss power and no heating through it, even in the on-line state. After installation, wait for the automatic short synchronization before the switched consumer is placed on the net. In the event of a failure of the supply voltage, the switching state is maintained. In the case of a recurring supply voltage, it is defined to be off. The extractor hood can only be switched on when the window is opened. If the window is closed, the relay will turn off. With a radio aster or a local conventional 230V control button (a mica flow is not allowed), the learning mode can be locked, unlocked or the storage content deleted. FTKB-wg: radio window door contact with solar cell and battery 75x25x12mm, pure white shiny. The window door contact FTKB supplies itself with a solar cell from 100 Lux daylight, otherwise for several years with a button cell CR2032. When closing and opening, the relevant telegram is sent twice in a row. The current status telegram is sent every 8 minutes. Fastening by gluing. Dimensions window door contact LxBxH: 75x25x12mm. Dimensions Magnet LxBxH: 37x10x6mm.