DN-651112, Industrial Gigabit PoE + injector 802.3 af / at 60W output power, hat rail and wall assembly,

Industrial Gigabit PoE + injector 802.3 af / at 60W output power, hat rail and wall assembly,

Industrial Gigabit PoE + injector 802.3 af / at 60W output power, hat rail and wall assembly, high output power with 60 watts PoE is preferably used if no power supply is possible at the operating location and appropriate devices can be supplied at the same time via the incoming network cable. This PoE injector, with a data transfer rate of 1 Gbit / s, corresponds to the Gigabit Ethernet standard and has a maximum output voltage of 48 - 55 V and a power output of 60 W. Two RJ45 sockets and a DC terminal bar are installed in the metal housing - the power supply via Pin 4 / 5 (+) & 7 / 8 (-) and Pin 3 / 6 (+) & 1 / 2 (- is made via the PoE Out Network Book. The PoE output has short circuit protection, flash and overvoltage protection as well as an automatic device detection and classification for IEEE802.3at PoE + and IEEE802.3af PoE.- The pen can be mounted with the help of the assembly terminal on a DIN rail (hat rail) - the power consumption of the pen itself is max. 3 Wat.With the help of the Digitus PoE injector, you can minimize your wiring effort when installing PoE-enabled devices such as IP network cameras. The input of the data, as well as the power supply for the devices, is only done via an Ethernet line. This makes it unnecessary to lay a separate power line and you are able to expand your network even where there are no sockets or power lines. The pen is fully compatible with the IEEE 802.3at Ultra PoE standard and provides an output power of 60 watts.