DN-95102-1, Gigabit Ethernet PoE Injector, 802.3af Power Pins: 4 / 5 (+), 7 / 8 (-), 15.4W

Gigabit Ethernet PoE Injector, 802.3af Power Pins: 4 / 5 (+), 7 / 8 (-), 15.4W

Gigabit Ethernet PoE Injector, 802.3af Power Pins: 4 / 5 (+), 7 / 8 (-), 15.4W Minimize your wiring effort for wireless APs, IP phones or any other PoE-capable device! - PoE is preferably used if no power supply is possible at the location and appropriate devices can be supplied with power at the same time via the incoming network cable. - This PoE injector, with a data transfer rate of 1 Gbit / s, corresponds to the Gigabit Ethernet standard and has a maximum output voltage of 48 V and a power output of 15.4 W. - Two RJ45 sockets and a cold device connection are included in the plastic housing - The power supply is made via Pin 4 / 5 (+) & 7 / 8 (-) via the marked PoE network socket. - The PoE output has a current limitation, a short circuit backup and an automatic terminal device detection and classification. - The power consumption of the pen itself is max. 1.6 Watt - A cold unit connection cable is included. With the help of the Digitus PoE injector, you can minimize your wiring effort when installing PoE-enabled devices such as IP network cameras. The input of the data, as well as the power supply for the devices, is only done via an Ethernet line. This makes it unnecessary to lay a separate power line and you are able to expand your network even where there are no sockets or power lines. The pen is fully compatible with the IEEE 802.3af PoE standard and provides an output power of 15.4 watts.