DN-95107, Gigabit Ethernet PoE + + pen, 802.3at power supply: 4 / 5 (+), 7 / 8 (-) u 3 / 6 (+), 1 / 2 (-), 95W

Gigabit Ethernet PoE + + pen, 802.3at power supply: 4 / 5 (+), 7 / 8 (-) u 3 / 6 (+), 1 / 2 (-), 95W

Gigabit Ethernet PoE + + injector, 802.3at power supply: 4 / 5 (+), 7 / 8 (-) u 3 / 6 (+), 1 / 2 (-), 95W Minimize your wiring effort for wireless APs, IP phones or any other PoE-capable device! - PoE is preferably used if no power supply is possible at the operating location and appropriate devices can be supplied at the same time via the incoming network cable. - This PoE injector, with a data transfer rate of 1 Gbit / s, corresponds to the Gigabit Ethernet standard and has a maximum output voltage of 55 V and a power output of 95 W. - Two RJ45 sockets and a cold device connection are included in the metal housing - The power supply is made via Pin 4 / 5 (+) & 7 / 8 (-) and Pin 3 / 6 (+) & 1 / 2 (-) via the PoE network jack. - The PoE output has a current limitation, a short circuit backup, and an automatic terminal device detection and classification for IEEE802.3at PoE + and IEEE802.3af PoE. - The power consumption of the pen itself is max. 3 Watt - A cold unit connection cable is included. With the help of the Digitus PoE injector, you can minimize your wiring effort when installing PoE-enabled devices such as IP network cameras. The input of the data, as well as the power supply for the devices, is only done via an Ethernet line. This makes it unnecessary to lay a separate power line and you are able to expand your network even where there are no sockets or power lines. The injector is fully compatible with the IEEE 802.3af / at PoE standard and provides an output power of 95 watts.