MTN6705-0008, SpaceLogic KNX Master switch / blinds, 8-fold

SpaceLogic KNX Master switch / blinds, 8-fold

Kombi switch-blinds 8-fold, 16 A, REG, SpaceLogic KNX switch-blinds, 8-fold Master 8 switch-outputs 4 blinds outputs: The function of the blinds or switching channels is freely configurable. All blinds can be operated manually via a button. With integrated bus coupler. For installation on DIN-rail TH35 according to EN 60715. The bus is connected via a bus terminal, a data rail is not required. Extension possible by SpaceLogic KNX extensions MTN6805-0008. The master controls the extensions, their power supply and the communication with the bus. The number of channels can be increased by the cable and tool-free connection of SpaceLogic KNX switch blinds extensions. A maximum of 2 extensions can be connected to the master, so that up to 24 loads can be switched or 12 blinds can be controlled. Supply voltage over the master: KNX bus, approx. 6.5 mA (master), approx. 9 mA (master + 1 extension), approx. 12.5 mA (master + 2 extensions). For the extension of the KNX installation by SpaceLogic KNX extensions (MTN6805-0008), no further ETS application or The KNX topology. General KNX software functions: energy saving, device security, device state, manual operation, PIN code for firmware update. Each channel can be given any name in the parametrization to facilitate the assignment of group addresses. Functions of the blinds / shutters: -duration -idle-time -step-interval -blocking-movement-range limits -weather alarm -8-bit positioning for height and lamella -16 scenes, status and feedback function per channel. Functions of the switch: -operation as an open / close -programmable behavior for download -delay functions for each channel -step light function with / without manual output function. Disable warning for step light function -16 scenes per channel, central function, blocking function, link or forced guidance, return function for each channel. Nominal voltage: AC 250 V, 50-60 Hz. Nominal current: 16 A AC-1, IEC 60947-4-1 / 10 A, IEC 60669-2-5For each blinds-roller charging channel: -engine load 1000 VAFor each switching output nominal load: -filament lamps: 2300 W halogen lamps: 2300 W-LED: 200 W-capacitive load: 10 AX, max. 140? F -Inductive load: 10 A, cos? 0.6Relay data -on-turn current: max. 800 A / 200? s, max. 165 A / 20 ms. Device width: 4 TE (72 mm) Accessories: SpaceLogic KNX switch / blinds extension MTN6805-0008. To the content: With bus connection terminal.