MTN6710-0102, SpaceLogic KNX Master Dimmer, 2-fold

SpaceLogic KNX Master Dimmer, 2-fold

Universal dimmer 2-fold, 16 A, REG, SpaceLogic KNX dimmer, 2-fold master dimmer with 2 channels for switching and dimming. a. The master automatically recognizes the connected load. This is done when switching on in the background. Combinations of ohm and inductive or ohm and capacitive loads can also be connected. Combinations of inductive and capacitive loads shall not be connected. No flickering of the LEDs in the switched off state. Channel status display via LEDs. A green LED indicates the operational readiness. All dim outputs can be operated manually with pressure keys (on / off, dimm UP / down, LED mode / car mode, one / two-key operation). The number of dimming channels - can be increased by connecting SpaceLogic KNX dimmer extensions. By connecting a SpaceLogic KNX switch / blinds extension, the master's channels can also be extended with switches / blinds channels. With screw clamps, short circuit, idle and overtemperature protection with soft start lamp type. Different phases can be connected. With integrated bus coupler. For installation on DIN-rail TH35 according to EN 60715. The bus is connected via a bus terminal, a data rail is not required. The master controls the extensions, their power supply and communication with the bus. The number of channels can be increased by the cable and tool-free connection of SpaceLogic KNX dimmer and switch / blinds extensions. A maximum of 2 extensions can be connected to the master. For the extension of the KNX installation by SpaceLogic KNX extensions (MTN6805-0008switch / blinds or MTN6810-0102Dimmer). does not need any further ETS application or The KNX topology. Device width: 4 TE approx. 72 mm Accessories: -SpaceLogic KNX Dimmer extension MTN6805- 0008- SpaceLogic KNX switch / blinds extension MTN6805- 0008.