506500, the 1f 200 W UP Binary. 3f OneKNX

Dimachtor 1f 200 W UP Binary. 3f OneKNX

Dimachator 1-fold 200 W with binary input 3-fold for Gira One and KNX - switching and dimming of filament lamps, HVhalogen lamps, dimmable HVLED lamps, dimmable compact fluorescent lamps, dimmable inductive transformer with NVhalogen or NVLED lamps, dimmable electronic transformer with NVhalogen or NVLED lamps. - Automatic or manual selection of the dim principle appropriate to the load. - idle, short-circuit and overtemperature-proof. - Up to 8 independent logic functions for simple or complex logical operations. - Actively sending back or status messages can be globally delayed after bus voltage recovery or after an ETS programming process. Dam outputs: - setting the load and setting the dimming principle possible: Universal (with automatic measurement process), electronic transformer (capacitive / phase section), conventional transformer (inductive / phase cut), LED (phase cut) or LED (phase). - dimming characteristic for adjustment to the connected load in the time and value range can be configured. - adjustment of the dimmable range possible (on-turn brightness, basic brightness; alternative: lower limit and upper limit). - Behaviour adjustable when receiving an absolute brightness value (dimming, jumping, fading). - Behaviour can be adjusted during the relative high dimming in the switched off state (turn on channel, no reaction). - Central control function over up to 6 switching objects, 6 dimming objects and 6 value objects and collection feedback. - feedback switching: active (when changing or cyclic on the bus) or passive (object can be read out) feedback function. - Feature value feedback: Active (when the bus is changed or cyclic) or passive (object can be read out) return function. - For active feedback objects the type of update is adjustable (if the input object is changed or if the return value is changed). This makes it possible to adapt to visualization individually. - feedback for short circuit, overload / power failure and charging (KNX compliant and extended). - reaction in the event of a bus failure / return and adjustable after an ETS programming process. - Logical connection function for the output. - a barrier or alternatively a forced position function can be parametrized. - time functions (on, off delay). - Stair light function with a pre-warning function by reducing the time-controlled lighting or activating a permanent lighting. - Stairway function with time extension or variable stairway time delivery via communication object. - Soft- Ein-function and Soft- off-function can be adjusted. - Automatic switching off at brightness value < X% adjustable (with individual delay time). - Integration in light scenes possible: Up to 64 internal scenes can be parametrized. - Delay time can be configured during scene call. - Dim behavior can be adjusted when calling a new scene (jump, dim, fading). - Visual feedback when saving a scene. - Extended scene call. - operating hours counter can be activated. - operating hours counter as forward counter (with optional limit value) or reverse counter (with optional start value). The maximum connection power depends on the selected mode of operation (phase or phase). For more information, see the instructions for use. Performance reduction when installed in wooden or dry wall -15% multiple combinations -20%. Performance expansion by Gira performance additions. Condition of delivery: operation of the dim output via input 1 (light) and input 2 (dark).