MEG6193-6010, Flex, KNX, System Design, Module 3-fold

Flex, KNX, System Design, Module 3-fold

The 3-fold module of the Merten KNX touch sensor Flex offers high efficiency through the display in combination with maximum flexibility through different tilt combinations. It can be installed in both residential and commercial buildings and in new or existing KNX installations. Thanks to the display, individual icons and texts can be programmed for each wipe. All this is simple and clear in the ETS. The display allows a digital label that is programmed via the ETS. To save energy and increase the service life of the device, the display can be disabled after a certain time. The proximity sensor activates the display comfortably when you move towards it. In addition, it is possible to display the time and date as a screen saver. With the blocking function some functions can be locked in certain events. For example, it is possible to lock the roller shutters with strong wind to avoid damage. The product must be flexible as the living conditions change quickly. The functions can be easily changed with the ETS by the installer whenever the need exists. The triggering of the programming mode by a key combination also allows for subsequent changes without having to expand the button. The nominal voltage of the module is 21- 30VDC at 24V / 16mA. The standby consumption is about 120mW if the display is inactive. The maximum power is 400mW. The assembly type of the module is surface assembly. The dimensions of the module are (B) 71mm x (H) 71mm x (T) 31mm with a weight of 64.6g. The protection type is IP20 with an operating temperature of -5 ° C to + 45 ° C. A kit contains the KNX module 3-fold. The package also contains a metal support ring. To complete, the appropriate taps and a frame are required. The product allows quick and flexible adjustment of the button with the help of a display. Icons and texts support the intuitive operation of the button. The 3-fold module has CE, KNX and CB- certificates.