RT / U12.86.11-811, Busch-RoomTouch ® 4 incl. Bus couplers

Bush-RoomTouch ® 4 incl. Bus couplers

Free programmable touch panel with a 4-inch IPS screen with a resolution of 480x480 that allows the control and monitoring of the free @ home or KNX system. Control, monitor and manage your entire installation on one device: Switching - dimming - slider - blinds - RGBW control element - step switch - scene switch - display element - audio control element. The display contains a brightness and alignment sensor. The operation is supported with a haptic feedback. The display contains an integrated temperature controller (RTC) with integrated temperature sensor. A remote sensor (e.g. 6226 / T / PT1000) can be optionally connected to the back input. An additional power supply 24 VDC (e.g. 6358-101) is required for operation. KNX: Up to 12 control pages can be installed. A maximum of 4 touch surfaces are possible on each side. A maximum of 12 operating functions per device. 10 Stk. Scenario, 10 Stk. Logic functions, 10 Stk. Presence simulations and time programs, 18 Stk. Interruptions and alarm messages. The primary function allows direct operation of a function when touching the display. The back input can also be used as a binary input as an alternative to the remote sensor. Free @ home: Up to 16 operating functions can be set up on up to 4 pages. The scene function, logic functions, presence simulation, and time programs are already set in free @ home from the system access point and are not required in the display. Interference and alarm messages are displayed as pop up. The back input can be used to connect a remote sensor (e.g. 6226 / T / PT1000). Design line: Busch-RoomTouch ® product range: KNX, Busch-free @ home ®