H82050T2002, STX support rail distribution modular with 6x LC-D OM3 turquoise

STX support rail distribution modular with 6x LC-D OM3 turquoise

For connecting breakout and mini-breakout cables and connecting glass fibre lines. A cable connection M20 for cable diameter 5 - 9 mm is included. All too often, distributors are installed that are oversized for the current requirements - either to be able to take into account future extensions or because there is no more suitable solution. The new modular distributor from Telegärtner can be adapted exactly to the actual requirements and later, in the current operation, can be extended without any need, which saves a lot of money. The couplings of the connectors are mounted at an angle of 45 degrees, so that patch cables can be easily inserted and unplugged with minimum space requirements. Despite its compact dimensions of 35 x 215 x 155 mm (width 2 division units (TE)), the retictable modules offer a generous overlength for fibres and veins. The cable connection is possible from four directions (top, bottom, top, bottom, bottom) and can be set on site. The assembly of the modules can be done on support rails TH35 according to DIN 60715 or on the wall. Note: In the case of ready-to-use glass fibre lines, which are created with the TICNET configurator, a single whip length of 0.7 m is to be chosen for an optimal cable guide. Fire protection class: Non-relevant burning off: Non-relevant smoke development: Non-relevant acid development: Non-relevant number of clutches: 6designation: STX carrier rail distribution with 6x LTD-OM3 housing: TX-type-type-type: PX-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2-2 Only versions with pigtails (PT): 1 pcs, type Telekom, with 2x splice holders for 2x 12x crimp- / splice protectorsDescription: STX support rail distribution modular with 6x LC-D OM3 turquoise delivery: basic housing with pre-assembled couplings, 4 breakable openings for mounting the cable fasteners, 2 connection bars, 1 cable screw M20x1.5, assembly instruction, packaging, variants with pre-assembled pigtail, also available in a colour. VDE 0888 encoded pigtailsets, 2 cable binders, and a split cassette with split holders