GD02K-DIN, GSM-selector / control unit (2G) for DIN-rail 2TE interference message

GSM selector / control unit (2G) for DIN rail 2TE fault message

GSM (2G) dial and control unit for DIN-Hut-rail assembly with thermost- and pulse counting function. The device uses the 2G mobile network, not 4G or 5G. A 2G connection at the location shall be checked. Two inputs (connection and / or separation to mass alternatively lower or exceed a voltage value, max. 24V DC) to trigger SMS messages on up to 100 phone numbers, additional selections can be adjusted. Both inputs can be used as impulse meters (power meters, water meters, gas meters, etc.), where the current counter level can be accessed by SMS. An additional input can be used for temperature monitoring (temperature sensor GD02T Art.No. 37118 optionally available). A power relay output (alternating contact, ohmic load 16A, 230V, inductive load 3A, 230V) can be controlled by SMS or free of charge by call (status or impulse switching, pulse switching time from 1s to 24h). The second input can be used as an alternative transitory output (max. 24 VDC, 100mA). Programmable via GD-Link Software (MS Windows) locally via the supplied USB cable or via a GSM data connection (GPRS) via remote access. GSM range: 850 / 900 / 1800 / 1900MHz (2G). AWUG / AWAG. Power supply: 230V with integrated emergency power (up to 3 hours fuse). Case dimensions: 36 x 90 x 58mm (2TE). Incl. USB cable and bar antenna. External antenna ANT08 or ANT09 optionally available (often required for cabinet installation). A standard SIM card is required for operation (compatible for dial devices, mini SIM, 2FF). Delivery without SIM card.