TYMS646R, heating factor 6f KNX Sec, m.Regl., 24 / 230V

Heating factor 6f KNX Sec, m.Regl., 24 / 230V

Heating unit 6-fold KNX Secure, with controller for 24 / 230V actuator, triac.Heating unit (REG) KNX Secure with electronic outputs (Triac) for noise-free control of electrothermal actuators for heating systems or cooling decks. Line-in device with integrated bus actuator, bus connection via KNX terminal, sliding switch car / hand, 6 hand keys for on / to each actuator channel with status LED (default, short circuit, overload), and control panel with integrated control and control panel. Functions: Output voltage for compatible valves 230 V AC or 24 V AC, temperature controller for heating and cooling, with 12 temperature controllers for controlling up to 12 independent zones, on / off or PWM control. Hand control via the channel's sliding switch with 0% - 50% - 100%. Diagnostic function via output with multi-colour LED, time / date programmable valve protection / pump seat protection and forced position. Lower values for summer / winter operation. 2 x logic block. Parameter set values for normal, forced or emergency operation. Cyclic monitoring / detection of the input signals of thermostats (monitoring time approx. 45 min). In the case of thermostat defect, the triac output is set in emergency operation. The device can be programmed using the ETS (from version 5) and the hager easytool. The range of functions depends on the commissioning. All actuators shall be connected to the same operating voltage. Please note installation instructions for heating / actuator manufacturers.