TYMS646T, heating factor 6f KNX Secure, 24 / 230V

Heiz.-actor 6f KNX Secure, 24 / 230V

Heating unit 6-fold KNX Secure for 24 / 230V actuators, triac.Heating unit (REG) KNX Secure with electronic outputs (Triac) for the noise-free control of electrothermal actuators for heating systems or cooling ceilings. Line-in device with integrated bus-coupler, bus connection via KNX connection terminal, sliding switch car / hand, 6 hand keys for on / to per actuator channel with status LED (default, short circuit, overload), programming key with integrated clamp, and output clamp for LED. Functions: Output voltage for compatible valves 230 V AC or 24 V AC, temperature controller for heating and cooling, with 12 temperature controllers for controlling up to 12 independent zones, on / off or PWM control. Hand control via the channel's sliding switch with 0% - 50% - 100%. Diagnostic function via output with multi-colour LED, time / date programmable valve protection / pump seat protection and forced position. Lower values for summer / winter operation. 2 x logic block. Parameter set values for normal, forced or emergency operation. Cyclic monitoring / detection of the input signals of thermostats (monitoring time approx. 45 min). In the case of thermostat defect, the triac output is set in emergency operation. The device can be programmed using the ETS (from version 5) and the hager easytool. The range of functions depends on the commissioning. All actuators shall be connected to the same operating voltage. Please note installation instructions for heating / actuator manufacturers.