SD / U12.55.11-825, Busch-Trevion ® Display 2.4 for Busch-balance ® SI

Busch-Trevion ® Display 2.4 for Busch-balance ® SI

For Busch-balance ® SI.Freely programmable touch panel with a 2.4- inch IPS screen with a resolution of 240 * 240, which allows the control and monitoring of the free @ home or KNX system. Control, observe and manage your entire installation on one device: Switch - dimming - slider - blinds - RGBW control element - step switch - scene switch - display element - audio control element. The display contains a brightness and alignment sensor. The operation is supported with a haptic feedback. The display contains an integrated temperature controller (RTC) with integrated temperature sensor. At the back input, a remote sensor (e.g. 6226 / T / PT1000) can be optionally connected for temperature detection. An additional power supply 24VDC (e.g. 6358-101) is required for operation. KNX: Up to 12 control pages can be installed with up to 12 control elements. A maximum of 1.. 4 touch surfaces are possible per side. 10 Stk. Scenario, 10 Stk. Logic functions, 10 Stk. Presence simulations and time programs, 18 Stk. Interruptions and alarm messages. The primary function allows direct operation of a function when touching the display. The back input can also be used as a binary input to the remote sensor. Free @ home: Up to 16 operating functions can be created on up to 4 pages. A maximum of 4 touch surfaces are possible on each side. The scene function, logic functions, presence simulation, and time programs are already set in free @ home from the system access point and are not required in the display. Interference and alarm messages are displayed as pop up. The back input can be used to connect a remote sensor (e.g. 6226 / T / PT1000). Design line: Busch-balance ® SI, Busch-Trevion ® product range: KNX, Busch-free @ home ®