DL-RGB-16A-DC12 +, DALI-2-LED-RGB- dimmer 16A intermediate ceiling (DT8)

DALI 2 LED RGB dimmer 16A Clipboard (DT8)

DALI 2 LED dimmer with RGB color control for the intermediate ceiling. 120x30x22mm. Protection type IP20. Stand-by loss only 0.12 watts. DALI-2 certified. DALI-2 is the latest generation of the DALI standard with extended functionality. DALI-2 devices also control all previous DALI functions and are therefore backward compatible. Suitable for controlling constant voltage LED modules (CV) with operating voltages from 12V to 48V. Operating mode DT8: a DALI address for control of brightness and color (DALI DT8, type RGBWAF). Operating mode Colour & Dim: control over 2 DALI addresses, one to adjust the brightness and one to adjust the color. SwitchDim2: operation over 2 switching inputs allows control of brightness and color without DALI. Dim range 0.1% -100%. Reversible PWM frequency (122Hz / 244Hz / 488Hz / 976Hz). Supply voltage 12V to 48V DC (according to the operating voltage of the LED modules). Connection current 16? The maximum connection current can be distributed to the channels. Low standby losses. High efficiency. Configuration via PC software DALI cockpit and DALI USB interface. Type of operation: The device has several operating modes: DT8 (delivery state): In this mode of operation, brightness and color are controlled by a DALI address (Device Type 8). The operation can also be done via two key inputs (SwitchDim2): SwD1: Brightness. Short key printing: On / off. Long key pressure: dimming. SwD2: Color. Colour & Dim: This mode of operation is used to control RGB lamps. The control is done via 2 DALI addresses, where the brightness is affected by one address and the channel distribution (e.g.: color). The Colour & Dim mode allows the color to be adjusted without affecting the brightness and vice versa. The adjustment is done with DALI standard commands such as Dim Up / Down and can be done with all common controls and gateways (e.g.: KNX). This control option offers an alternative to DT8 RGBWAF mode. Can be operated via DALI or SwitchDim2: DALI address 1, SwD1: Brightness. DALI address 2, SwD2: color.