DL-3CH-R16A-DC12 +, DALI-LED-3-channel dimmer 16A support rail (DT6)

DALI-LED-3-channel-dimmer 16A support rail (DT6)

3-channel DALI LED dimmer for the support rail DIN-EN 60715 TH35. 98x17,5x56mm. Protection type IP20. Stand-by loss only 0.12 watts. Suitable for controlling constant voltage LED modules (CV) with operating voltages from 12V to 48V. Operating mode DT6: separate control of channels via 3 DALI addresses. Operating mode Colour & Dim: control over 2 DALI addresses, one to adjust the brightness and one to adjust the color. SwitchDim2: operation via 2 key inputs allows control of brightness and color without DALI. Dim range 0.1% -100%. Reversible PWM frequency (122Hz / 244Hz / 488Hz / 976Hz). Supply voltage from 12V to 48V DC (according to the operating voltage of the LED modules). Connection current 16A. The maximum connection current can be distributed to the channels. High efficiency. Configuration via PC software DALI cockpit and DALI USB interface. Type of operation: The device has several operating modes: DT6 (delivery state): In this mode of operation, each channel is controlled by a separate DALI address (Device Type 6). The operation can also be done via two key inputs (SwitchDim2): SwD1: Brightness. Short key printing: On / off. Long key pressure: dimming. SwD2: Scene switch (short key pressure). Colour & Dim: This mode of operation is used to control RGB lamps. The control is done via 2 DALI addresses, where the brightness is affected by one address and the channel distribution (e.g.: color). The Colour & Dim mode allows the color to be adjusted without affecting the brightness and vice versa. The adjustment is done with DALI standard commands such as Dim Up / Down and can be done with all common controls and gateways (e.g.: KNX). This control option offers an alternative to DT8 RGBWAF mode. Can be operated via DALI or SwitchDim2: DALI address 1, SwD1: Brightness. DALI address 2, SwD2: color.