ASSI-BT / 230V, external socket control with Bluetooth, 1 clasp 16A

External socket switch with Bluetooth, 1 clasp 16A

1-channel control with Bluetooth and ELTAKO Connect app. 1 Clasp not free of potential 16A / 250V AC, 230V LED lamps and ESL up to 400W, filament lamps 2300W. 116x56x46mm (dimensions without plug), black. Suitable for indoor and outdoor use, IP44 (water-protected). With Astrofunction. Stand-by loss only 0.3 watts. Interconnector for German protective contact socket. With increased contact protection. Supply and switching voltage 230V. Contact in the zero passage. Bistabile relays, so there is no coil loss power and no heating through it, even in the on-line state. Up to 60 control tube storage places are freely distributed on the channel. With date and automatic summer time / winter time conversion. Power reserve without battery approx. 7 days. Each storage space can be occupied with either the Astrofunction (automatic switching after sunrise or sunset) or the turn-on and off time. The on / off time Astro can be moved up to ± 2 hours. In addition, a time shift of up to ± 2 hours, influenced by the solenoids, can be entered. The switch clock is set via Bluetooth with the app. Connect the control clock to the app: Press the front button for 5 seconds, the blue LED flashes. Now the connection to the app can be made (output state PIN 123123). The flashing of the blue LED signals the coupling readiness, which ends automatically after 3 minutes, but can be finished manually by a button pressure > 5 seconds. Scan QR code on the user manual, the app leads through the learning process. After the connection to the app has been made, the blue LED lights up permanently. If the connection is not separated via the app, it will be automatically separated after 20 minutes without interaction with the app. After the connection is disconnected via the app, the control clock again signals its coupling readiness and the blue LED blinks. Amend PIN: The PIN for the bluetooth connection can be changed in the app, under the item device PIN. Bluetooth Reset (delete any modified PIN): Tap the button on the front for a short time or put the plug in and out within 40 seconds. The blue LED blinks. Setting the control clock via the ELTAKO Connect app: Edit programs: Create, edit and activate / disable time and astroprograms. Channel configuration: selection between the AUTO-, the on or the off function. Random mode: In case of random mode, all switching time points of all channels are randomly moved by up to 15 minutes. Switch-on times to earlier and off times to later. Time offset solstice: setting a time shift of up to ± 2 hours at the summer solstice and at the winter solstice. Date and time: Manual or automatic setting of the date, time, time zone and summer / winter time possible. Location: Manual or automatic input of the site possible. Bluetooth: Activation of permanent visibility possible. By activating the permanent visibility, Bluetooth remains active on the control clock and does not need to be activated manually before the connection is set up. Work settings: Selection between deleting all programs, resetting the Bluetooth settings and resetting to work settings. Use the front button: With a short key pressure, you can always manually turn on and off. On and off the AUTOfunction: With a key pressure > 2 seconds but < 5 seconds the AUTOfunction can be switched on and off. If the key is pressed for 2 seconds, the green LED will light up for a short time, then the green LED will signal whether the AUTOfunction is on or off. If the green LED lights up for 0.3 seconds, the AUTOfunction is disabled, set time and astroprograms are not executed. If the green LED lights up for 2 seconds, the AUTOfunction is activated, the control clock switches according to the time and astroprograms.