TE Connectivity, DuraSeal Butt Splice Connector, Red, Insulated, Tin 22 → 18 AWG

Splices

Red 0.25 - 1.6 mm²Blue 1.0 - 2.6 mm²Yellow 2.7 - 6.6 mm²

Red 0.25 - 1.6 mm²Blue 1.0 - 2.6 mm²Yellow 2.7 - 6.6 mm²

Approvals

Red 22 → 18 AWG

Features and Benefits:

Colour is red - colour coded for easy identification of gauge sizesMaximum wire size 1.5mm Dia.0.5 to 1.0mm² CSAResistance to moisture and abrasionStrain reliefProtection from wire pull outEasy to install Materials:Insulative sleeve - polyamide with thermoplastic adhesive coating insideCrimp splice – Tin plated copper alloyBase metal – Copper

Colour is red - colour coded for easy identification of gauge sizesMaximum wire size 1.5mm Dia.0.5 to 1.0mm² CSAResistance to moisture and abrasionStrain reliefProtection from wire pull outEasy to install Materials:Insulative sleeve - polyamide with thermoplastic adhesive coating insideCrimp splice – Tin plated copper alloyBase metal – Copper

Applications:

These splice connectors are designed to splice tin plated or bare copper stranded wires with an insulation rated for at least 85 degrees C. Can be found in areas such as:AutomotiveCommercial wiringMarine electronics

These splice connectors are designed to splice tin plated or bare copper stranded wires with an insulation rated for at least 85 degrees C. Can be found in areas such as:AutomotiveCommercial wiringMarine electronics

Approvals

Duraseal Heatshrinkable

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed

UL Listed