Igus E4.32, e-chain Black Cable Chain - Flexible Slot, W125 mm x D54mm, L1m, Igumid G

Series E4.32 Cable Chain

The Igus Series E4.32 cable chain snaps open on both sides with crossbars at every link.

The Igus Series E4.32 cable chain snaps open on both sides with crossbars at every link.

Straight run through inner / outer-link designLow-noise operation due to integrated brake on the radial stop dogs The tongue and groove design facilitates very high stiffness and load capacity in the presence of shear forces 15% more tensile strength (compared to the best old Series E4), extended unsupported length through improved stop dog system and vertical radial stops New opening crossbar available for faster assembly/disassembly - 385.X. QNew separation kit increases the service-life of your cables by up to 4 timesVersion NC "no camber" possible by simply rotating the outer link without retrofit e-chain® links removable on both sides The lid on the e-tube pivots and is removable Cable-friendly, wide polymer crossbars Optimized gliding surfaces – long service-lifeSmooth outer contour, reduced dirt adhesion Strain relief possible with strain relief crossbar on the mounting bracketWhen to use E4.32:If a robust height of 32mm is requiredIf inner widths up to 400mm are requiredFor unsupported lengths up to 3.25m and fill weights up to 15kg/metreFor long travel up to 200mAlso suitable for side-mounted, vertical standing of hanging applicationsPlease see RS 796-6774, 796-6783 or 796-6786 for end brackets

Straight run through inner / outer-link designLow-noise operation due to integrated brake on the radial stop dogs The tongue and groove design facilitates very high stiffness and load capacity in the presence of shear forces 15% more tensile strength (compared to the best old Series E4), extended unsupported length through improved stop dog system and vertical radial stops New opening crossbar available for faster assembly/disassembly - 385.X. QNew separation kit increases the service-life of your cables by up to 4 timesVersion NC "no camber" possible by simply rotating the outer link without retrofit e-chain® links removable on both sides The lid on the e-tube pivots and is removable Cable-friendly, wide polymer crossbars Optimized gliding surfaces – long service-lifeSmooth outer contour, reduced dirt adhesion Strain relief possible with strain relief crossbar on the mounting bracketWhen to use E4.32:If a robust height of 32mm is requiredIf inner widths up to 400mm are requiredFor unsupported lengths up to 3.25m and fill weights up to 15kg/metreFor long travel up to 200mAlso suitable for side-mounted, vertical standing of hanging applicationsPlease see RS 796-6774, 796-6783 or 796-6786 for end brackets

Series E4.32 e-chain®

Series E4.32 e-chain®

The E4 system combines all the benefits of its three predecessors and is the best igus® e-chain® in the product range. The E4 series are more stable with the same or smaller dimensions than their predecessors. Almost all accessory components and mounting dimensions are identical. With the igus® E4 system, the service life of your application can be increased still more and thereby further reducing costs.

The E4 system combines all the benefits of its three predecessors and is the best igus® e-chain® in the product range. The E4 series are more stable with the same or smaller dimensions than their predecessors. Almost all accessory components and mounting dimensions are identical. With the igus® E4 system, the service life of your application can be increased still more and thereby further reducing costs.