KDS 116, exhaust air control cable installed version 16 A

Exhaust air control cable installed version 16 A

By using the KDS 116 cable exhaust air control, an exhaust system can only be used if the window is open and the necessary supply air can flow into the room. A magnetic switch on the window wing monitors whether the window is open or closed and sends this information to the control unit via a thin cable. This only releases the power supply when the window is tilted or opened. Assembly: The control line is clamped to the control unit and to the magnetic switch. Ideal for the subsequent installation with the control line with two veins. The control unit is equipped with a potential-free changer contact and can therefore be switched into the fan engine connection of the exhaust hood, so that the lighting of the exhaust hood works independently of the window position. Second window: The system can be combined with another cable magnetic switch KMS 098K22 for a second window. At least one window must be opened to enable the exhaust system to be switched on. KDS 116 combined with integrated switch contact at the window: Many window manufacturers offer windows with an integrated switch contact (opener / connector). The KDS 116 can be easily combined with these window contacts. KDS 116 combined with exhaust temperature guard: Once the exhaust gas temperature in the exhaust pipe exceeds 40 degrees, the window must be opened. Exhaust temperature monitor ATW 519 for KDS 110 / 116.Technical data voltage: 230 V 50-60Hz power consumption: approx. 2 Wswitching power relays: 3500 W / 16 A2 switching power relays: 2000 VA / 8 Acontrol voltage: 18 Vcable length: 6 m (extensible) functional range: -15 degrees / + 40 degrees protection: IP 20control unit (HxBxT): 51x5x1x26 mm magnetic switch (HxBxxT): 55x15x18 mm (Hxxxxxt): 15x15 mm (Hxbxxt)