DZD 60 / 4 B, axial roof fan DZD 60 / 4 B, horizontal inflating, DN600, rotary current

Axial roof fan DZD 60 / 4 B horizontal inflating, DN600, rotary current

Short description: housing, base plate, supply nozzle and rain protection hood made of galvanized steel sheet. Galvanized protection grid on the fading side, contact protection according to DIN EN ISO 13857. Stable transport eyes allow transport by crane. 8-leaf wing wheel made of glass fibre-reinforced polyamide. Thermal overload protection as standard. Ventilators meet the requirements of European ecodesign Regulation (EC) No 327 / 2011 Directive 2009 / 125 / EC. Vibration-free run by dynamically weighted wing wheel and engine (wave rotor), according to quality level 6.3, DIN ISO 1940, part 1. High ventilation-side efficiency, low operating noise. Increased durability through high-quality materials such as low-noise ball bearings. Fans are maintenance-free. Reversible operation of the fans possible. Customer-specific special voltages as special versions available on request and at an additional price. Can be switched over for ventilation or ventilation with a separate switch (except EZD... E). Support direction: The support direction is marked. Standard exhaust air operation, direction of transport over engine flashing. Rotary current motor: Asynchronous motor. Rating voltage 400 V, 50 Hz. Protection type DZD... D IP 54. Protection type DZD... B and... E IP 55. Speed controllable. Devices can be switched gradually with an optional 5-step transformer. Reversible. Reverse operation: The volume flow rate is reduced by about 35% with an abnormal direction of transport. Thermal overload protection as standard. Exemptions: In the case of type DZD 25 / 4 D (engine protection switch is provided on the other hand). The connections are free of potential to clamps and must be connected to a motor full-length protection switch e.g. MV 25 or the control circuit of a protection. Electric connection: connection cable, about 1.7 m long. Safety instructions: The fan may only be put into operation if the contact protection of the wheel is guaranteed in accordance with DIN EN ISO 13857, for example with Maico protection grid SG. A professional fixed installation at horizontal installation position, fixed electrical supply line and correct air flow via shaft or pipe is required. Article: DZD 60 / 4 B, conveyor volume: 9920 m3 / h, conveyor volume: 6050 m3 / h / in the opt. Efficiency, pressure pps, name: 175 Pa - in opt. Efficiency, speed called: 1330 1 / min - in opt. Efficiency, speed: 1337 1 / min, wheel type: axial, speed controllable: yes, reversibility: yes, voltage: current of rotation, measurement voltage: 400 V, power frequency: 50 Hz, nominal power: 1445 W / in the opt. Efficiency, INenn: 2.4 A / in opt. efficiency, IMax: 3,1 A, protection type: IP 55, heat class: F, power supply: 7 / 1,5 mm2, installation location: roof, installation position: vertical, material: steel plate, galvanized, color: silver, weight: 53 kg, weight with packaging: 61 kg, nominal width: 600 mm, width: 1100 mm, height: 1100 mm, depth: 460 mm, width with packaging: 1101 mm, depth: 520 mm, production temperature: -20 ° C, for the production of the product: 420 ° C, for the production of the product: 460 ° C, for the production of the product: 460 ° C, for the product type: 460 ° C, for the production of the product: 460 ° C, for the product type: 460 ° C, for the product type: 460 ° C, for the product type: 460 ° C, for the product type: 460 ° C, for the product type: 460 ° C, for the product type: 460 ° C, see for the product type: 460 ° C, for the product type: 460 ° C, for the product type: 460 ° C, for the