VH-I06262, ceiling infrared heating can be integrated 618x618x42mm 770W w

Ceiling infrared heating integrated 618x618x42mm 770W w

The ceiling heating element is used for heating closed rooms in the living and working environment. The VH-I series of ceiling infrared heating is suitable for installation in the ceiling covering, for example, in a plaster carton or wooden ceiling. The effective and yet small-format vitramo ceiling heating element heats up radiation-oriented walls that surround the room and differentiates the floor in such a way that they have only small temperature differences. Only in contact with the warm surfaces is the room air heated evenly and almost free of flow. This means that the conditions of living comfort are achieved without unnecessary energy use. The ceiling infrared heating of the VH-I series is produced in the sandwich structure. It consists of a single-disc safety glass glass (ESG glass glass, iron-oxide, satin, 5 mm thick, standard colour of the surface white similar to RAL 9010), which is heated on the back by a heating layer that converts electrical energy into heat. This layer is reinforced in a plastic mass. The back is highly effective heat-insulated and complete with an aluminium cover, which also includes the sides. Surface temperature max. 190 ° C at an ambient temperature of 20 ° C Due to the highly effective insulation on the back, ceiling heating elements achieve a very high radiation efficiency in the room. For the power supply, the heating elements are equipped with a connection cable made of silicone, 1.2 m long without a power connector. This product is a stationary single-space electric heater with a nominal heat output of more than 250 W to meet the mandatory ecodesign requirements of Commission Regulation (EU) 2024 / 1103, it must be supplemented by a controller that meets at least the following regulatory functions: TW (0 / 2 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / For further information and a declaration of the codes of the control functions, see the product data sheet. This product may only be installed by an electric expert and must be put into operation in accordance with the installation and assembly instructions. Only then will the mandatory ecodesign requirements of Regulation (EU) 2024 / 1103 be met. The electric power is responsible for the compliant commissioning. Vitramo is the leading manufacturer and produces wall and ceiling infrared heating exclusively in Germany.