VL-A09060, wall infrared heating 900x600x21mm 540W w

Wall infrared heating 900x600x21mm 540W w

The wall heating element is used for heating closed rooms in the living and working environment. The VL-A series of wall infrared heating is suitable for cleaning on the wall. The heating element can be mounted in both the cross and the high format. The effective and yet decorative vitramo wall heating element warms radiation-oriented walls that surround the room and differentiates the floor so that they have only small temperature differences. Only in contact with the warm surfaces is the room air heated evenly and almost free of flow. The wall heating element of the VL-A series consists of galvanized steel sheet, 0.8 mm thick, the front is powder-coated, signal-white similar to RAL 9003. The elements on the back are closed with a blank lid. Surface temperature max. 105 ° C at an ambient temperature of 20 ° C Due to the thermally separate structure, wall heating elements achieve a high radiation efficiency in the room. For the purpose of the power supply, the heating elements are equipped with a connection cable of silicone in white colour, 1.2 m long, without a power connector. This product is a stationary single-space electric heater with a nominal heat output of more than 250 W to meet the mandatory ecodesign requirements of Commission Regulation (EU) 2024 / 1103, it must be supplemented by a controller with at least the following control functions: TW (0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 For further information and a declaration of the codes of the control functions, see the product data sheet. This product may only be installed by an electric expert and must be put into operation in accordance with the installation and assembly instructions. Only then will the mandatory ecodesign requirements of Regulation (EU) 2024 / 1103 be met. The electric power is responsible for the compliant commissioning. Vitramo is the leading manufacturer and produces wall and ceiling infrared heating exclusively in Germany.