RLS 45 O, room air control RLS 45 O for up to 6 PushPull 60 O devices

Room air control RLS 45 O for up to 6 PushPull 60 O devices

Special characteristics: With the control, 5 ventilation levels PP45-15 / 20 / 30 / 36 / 42 m3 / h and PPB 30 - 5 / 12 / 18 / 22 / 26 m3 / h and 3 operating modes can be selected for continuous ventilation (with heat recovery), cross-ventilation (without heat recovery) and remote-controlled car operation. Operating mode Permanent ventilation with heat recovery: PushPull operation. The devices run alternately and change the direction of the drive all 60 s. Type of operation: A device is permanently in inlet operation and the corresponding device in exhaust air (e.g. for summer night cooling). In automatic operation, the flow volume is continuously adjusted to the sensor value (HYI, HY, CO2, VOC). The RLS 45 O air control can be extended with the internal moisture sensor or with the external sensors (humidity, CO2, VOC). The conveyor volume is adjusted and the devices reach the energy efficiency class A +. Operation of an odd number of devices is possible. The volume flows are automatically divided according to the number of devices. Modbus connection possible. The control can be extended with additional controls or power parts PP 45 LT. The room air control is required as an accessory for the end-assembly sets PP 45 K, PP 45 O or PPB 30 O. It is not possible to operate the final assembly set PPB 30 K in conjunction with the RLS 45 O room air control. A room air control RLS 45 O can control up to 6 PP 45 devices or up to 3 PPB 30 O devices at the same time. Article: RLS 45 O, measurement voltage: 230 V, power supply: 3 / 1.5 mm, installation location: wall, installation type: underplaster, material: plastic, colour: pure white, similar to RAL 9010, weight: 0.11 kg, weight with packaging: 0.33 kg, width: 80 mm, height: 80 mm, depth: 49 mm, width with packaging: 81 mm, height: 81 mm, packaging: 50 mm, depth: 50 mm