PP 45 K, end-assembly set PP 45 K comfort version

Final assembly set PP 45 K comfort version

Execution: With the devices a complete ventilation system according to DIN 1946-6 can be included. Exhaust air units can be built over a central control (RLS 45 K). With electric flap. Clear commissioning software with the use of the RLS 45 K control facilitates the commissioning. Settings can be saved and transferred to other controls. Optional accessories: wall block PP 45 MB, power part PP 45 LT, EnOcean extension module PP 45 EO, EnOcean Actor PP 45 ACT, moisture sensor PP 45 HYI and PP 45 HY, CO2 sensor PP 45 CO2, VOC sensor PP 45 VOC, air filter, replacement PP 45 G2, PP 45 G3 and PP 45 G2P, approvals and certificates: DIBt approval Z-51.3-416. Test report according to EN 13141-8. Registration in TZWL Bulletin. Heat exchangers: With the high-performance heat exchanger and the high-efficiency EC fan, the devices achieve a heat supply level of 84.3% for the reference volume flow according to EN 13141-8. Mounting instructions: Mounting takes place in 2 steps: installation of the raw shell PP 45 RHK (DN 160) or PP 45 RHL (DN 160) and an external cover in a core hole hole DN 160 with a inclination of 1-2%. We recommend to execute the core drilling with DN 182 and to align the tilt of the sleeve with the attached styrofoam wedges. The raw shell is protected from impurities with plaster cover. Then the integration of the end-assembly set will follow. No pipe installation necessary and no regulation of the plant necessary. Electrical connection: The device is delivered ready for use. Electrical connection is made by means of plug-in connection. Connection to space air control RLS 45 K or RLS 45 O via plug-in control lines. The 12 VDC power line of the space air control RLS 45 K / RLS 45 O for the device is the control line at the same time. Condensate sequence: The condensate is taken from an integrated condensate drop edge in the outer cover. Special characteristics: The unit line PP 45 K / O / RC is the lightest unit line on the market and convinces with the sound pressure levels (per ventilation level and distance 1 m): 21 dB (A) / 25 dB (A) / 31 dB (A) / 35 dB (A) / 38 dB (A). The energy efficiency of two devices + control convinces with a SPI value of max. 0.12 Wh / m3. Due to the very quiet and energy-saving engines, a very good sensor-led operation, the devices reach the energy efficiency class of A +. The pipe insert can be removed without tools for cleaning and for filter change. The two filters are also replaceable without tools. The heat exchanger can also be extended for cleaning purposes using a tool. The equipment can be operated in 5 different ventilation levels 15 / 20 / 30 / 36 / 42 m3 / h and in 3 operating programmes permanent ventilation with heat recovery, cross ventilation and remote-controlled car operation. Flow-optimized external covers in the accessories program keep the exhaust air away from the outside facade. PushPull 45, with fan, ceramic heat exchanger, internal cover and two integrated filters (ISO Coarse 30% (G2) and ISO Coarse 45% (G3)), so that the air is filtered in both directions. In order to achieve efficient ventilation, we recommend to operate the devices in pairs. In certain system combinations an odd number of devices is also possible. Required accessories: PP 45 RHK or PP 45 RHL, outer cover PP 45 AK, PP 45 AE, PP 45 AW, PP 45 AS, PP 45 AKR or PP 45 AKB for outside wall assembly or spawning element PP 45 LE for spawning channel assembly. Space air control RLS 45 K or RLS 45 O for the final assembly sets PP 45 K and PP 45 O and radio switch DS 45 RC for the radio device PP 45 RC. A room air control RLS 45 K or RLS 45 O can be used to control multiple devices (max. 6) simultaneously. When using the radio switch DS 45 RC, the number of devices is not limited, provided that the devices are within the range of the radio switch. Article: PP 45 K, version: comfort version, electric flap, conveyor volume: 15 m3 / h / 30 m3 / h / 36 m3 / h / 42 m3 / h, SEC average: -40,06 kWh / (m2), weight of the air-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-pressure-of Element-standard sound level difference Dn, w: 51 dB / measured with PP 45 LE and flap closed, 51 dB measured with PP45 AE, 2x PP45 SE, flap closed, 46 dB measured with PP45 LE, PP45 LEW90, flap open, approval number: Z-51.3-416, type of ventilation: decentralised air supply and exhaust, WRG over: other, heat supply level: 84.3%