RLS 45 K, room air control RLS 45 K for up to 6 PushPull 45 K devices

Room air control RLS 45 K for up to 6 PushPull 45 K devices

Special characteristics: With the control, 5 ventilation levels PP45-15 / 20 / 30 / 36 / 42m3 / h and PPB 30 - 5 / 12 / 18 / 22 / 26 m3 / h and 3 operating modes can be selected for continuous ventilation (with heat recovery), cross-ventilation (without heat recovery) and remote-controlled car operation. Operating mode Permanent ventilation with heat recovery: PushPull operation. The devices run alternately and change the direction of the drive all 60 s. Type of operation: A device is permanently in inlet operation and the corresponding device in exhaust air (e.g. for summer night cooling). In automatic operation, the flow volume is continuously adjusted to the sensor value (HYI, HY, CO2, VOC). The RLS 45 K air control can be extended with the internal moisture sensor or with the external sensors (humidity, CO2, VOC). The conveyor volume is adjusted and the devices reach the energy efficiency class A +. Operation of an odd number of devices is possible. The volume flows are automatically divided according to the number of devices. The time-limited intensive ventilation (shock ventilation) or the time-limited shut-off (sleep-in function) can also be selected by pressing the button. With the help of the RLS 45 K air control, the communication between exhaust air units (e.g. ECA / ER) and PushPull devices is possible. In other words, when an exhaust air fan is running, the PushPull devices go to the inlet operation to compensate for the resulting underpressure. The supply call operation is possible with a follow-up of 0.6 or 15 min. The connected number of devices is also taken into account. The control has a separate 230 V input whose function can be defined in the software. The following functions are available: safety shut-off, sleep function, shock ventilation, supply-call function for the exhaust air with 0 s, 6 min or 15 min after-flow. ModBus connection is possible, in addition, the RLS 45 K room air control offers the possibility to perform the device configuration with the PC / Laptop (Windows). Simple, time-saving digital commissioning and creation of digital commissioning protocols and recovery files. The RLS 45 K space air control in combination with the EnOcean extension module PP 45 EO offers the unique possibility of connecting the cable-bound PP 45 K and PP 45 O and the radio equipment PP 45 RC. This control combination can therefore be used to install, for example, wireless devices on the ground floor and radio devices on the first floor. The whole system is controlled with a key pressure. The control can be extended with further controls or power parts PP 45 LT. The room air control is required as an accessory for the end-assembly sets PP 45 K, PP 45 O or PPB 30 K, PPB 30 O. For the PP 45 RC, the RLS 45 K cable control can be used instead of the DS 45 RC radio switch. It is then necessary to combine RLS 45 K with the EnOcean extension module PP 45 EO. With a space air control RLS 45 K, up to 6 fans can be controlled at the same time, e.g. 6 x PP 45 devices or 4 x PP 45 devices + 1 x PPB 30 or up to 3 x PPB 30 devices. Article: RLS 45 K, measurement voltage: 230 V, power supply: 3 / 1.5 mm2, installation location: wall, installation type: underplaster, material: plastic, color: pure white, similar RAL 9010, weight: 0.11 kg, weight with packaging: 0.34 kg, width: 80 mm, height: 80 mm, packaging: 81 mm, size: 81 mm, packaging: 81 mm, size: 81 mm, packaging: 81 mm, size: 81 mm, size: 81 mm, size: 81 mm, size: 81 mm, packaging: 81 mm, size: 81 mm, size: 81 mm, size: 81 mm, packaging: 81 mm, size: 81 mm, size: 81 mm, size: 81 mm, size: 81 mm, size: 81 mm, size: 81 mm, packaging: 81 mm, size: 81 mm, size: 81 mm, size: 81 mm, size: 81 mm, size: 81 mm, size: 81 mm