ZEG2 EC, Central exhaust air unit ZEG2 EC Central ventilation with EC technology

Central exhaust air unit ZEG2 EC Central ventilation with EC technology

Central ventilation device. For simultaneous ventilation of several rooms in single-family houses or apartments. Protection type IP 20. Case easy to clean. The device is equipped with a quiet running and energy-efficient EC engine. With 5 possible exhaust air connections (3 x DN 125, 1 x DN 125 / DN 160) and 1 x DN 160 = the starting point), with a continuous air outlet DN 125. The engine and the electronics are integrated. Max. 28 speed levels are possible. By default on steps 1 (a *) = low, 3 (a *) = normal and 11 (a *) = high set. The default speed levels can be easily changed via so-called DIP switches. With integrated moisture sensor for automatic moisture-dependent control. Wireless remote control ZEG2 EC-FB included. * = there is the characteristic line a and the characteristic line b, depending on the DIP switch 7, control: cable-free remote control ZEG2 EC-FB with humidity sensor control and 6 adjustment keys (humidity sensor is included in the ZEG2 EC). Radio frequency 868.3 MHz. Dimensions (HxBxT): 83x80x28 mm. Protection type: IP 30. Status indicators by LED. Settings, absence operation (energy saving mode), automatic operation controls ventilation level according to the determined humidity sensor values, timer operation (15 / 30 / 60 minutes) in level High - then last selected level, 1. Low speed - standard position at night, 2. Normal speed - standard position at day, 3. High speed - during cooking and shower, For automatic operation: In this position, the exhaust air is measured at low speed up to a significant increase in relative humidity in the exhaust air within 3 minutes (adjustable 5% or 10% with DIP switch 7). The device then switches from level low (1) to normal (2) or high (3) depending on the DIP switch 7. If a decrease of the humidity is detected, the ZEG2 EC runs for 15 or 30 minutes in normal level, or High (can be adjusted with DIP switch 8). The device then switches back to low level. For absence operation: The ZEG2 EC runs in energy-saving mode and does not react to the moisture sensor. Assembly instructions: The ZEG2 EC-FB remote control can be installed in damp rooms, but not directly in the shower cabin. No splash water can be reached to the remote control (relative humidity max. 90%). The ZEG2 EC device must be installed in a dry room, it must not come into contact with spray water (relative humidity max. 90%). Electrical connection: flexible connection cable approx. 1.2 m long. Article: ZEG2 EC, conveyor volume: 535 m3 / h / 600 m3 / h / system pressure at 200 Pa or System pressure at 100 Pa, speed control: yes, SEC average: -20.6 kWh / (m2 * a), energy efficiency class: D, voltage type: alternating current, measurement voltage: 230 V, power frequency: 50 Hz, power consumption: 2 W - 85 W, IMax: 0.05 A - 0.8 A, protection type: IP 20, position: basement / memory / knee / household room / heating / technical room, installation: vertical / horizontal, system type: central, material: plastic, color: 485 mm, weight: 455 mm, size: 455 mm, packaging: 455 mm, size: 455 mm, size: 455 mm, size: 455 mm, size: 455 mm. Speed: 3200 1 / min, WRG over: without