WPL 09 ICS classic, air-water heat pump, WPL 09 ICS classic

Air-water heat pump, WPL 09 ICS classic

The power-controlled air-water heat pump with inverter technology is installed in the interior. The system is suitable for heating and hot water operation, but can also be used for efficient cooling through the cycle. The heat pump is used in new or low system temperature buildings. COMFORT CHARACTERISTICS: Very quiet operation through the capped cooling circuit and the decoupled compressor. Fully automatic control of the heating system by the integrated heat pump manager depending on the outside temperature. In connection with the optional Internet Service Gateway, the system can be controlled in the home network or with a mobile terminal device. The integrated circulation pump is automatically controlled by the pre and return temperature. The following components are integrated as standard: The emergency / additional electrical heating for monoenergy operation and anti-legioncell heating, the switch valve for the hot water production and the safety valve with the discharge line. The cooling circuit is hermetically closed, factory-side tested for sealness and filled with safety-cooling agent R410A. EFFICIENCY: In order to increase the return temperature, the waste heat of the inverter is used. Demand-dependent and energy-efficient sealingthrough reverse circulation. INSTALLATION: The heat pump is connected directly to the heating system thanks to the integrated vibration decoupling. Reduced installation effort thanks to pre-made, flexible air hoses with fast-loading adapters. The air hoses are connected to the top of the device, manual shortening or sealing are not necessary.