VL-F12060T, infrared table heating 1200x600x28mm 800W sw

Infrared table heating 1200x600x28mm 800W

The wall-table heating element is used for heating closed rooms in the living and working environment. The wall-table heating element of the VL-F _ T series is suitable for cleaning on the wall. The heating element can be mounted both in the cross and in the high format and can be described with simple table chalk. The effective and yet decorative Vitramo wall heating element warms up radiation-oriented walls that surround the space and differentiates the floor so that they have only small temperature differences among themselves. Only in contact with the warm surfaces is the room air heated evenly and almost free of flow. This means that the conditions of living comfort are achieved without unnecessary energy use. The wall table heating element is produced in the sandwich structure. It consists of a single-disc safety glass glass (ESG glass glass, iron-oxide, 4 mm thick with round corners R = 5 mm, surface matt, color black similar to RAL 9005), which is heated on the back by a heating layer that converts electrical energy into heat. This layer is reinforced in a plastic mass. The back is complete with an aluminium cover, black powder coated, which also includes the sides. Surface temperature max. 120 ° C at an ambient temperature of 20 ° C Due to the thermally separate structure, wall heating elements achieve a high radiation efficiency in the room. For the power supply, the heating elements are equipped with a connection cable of silicone, colour black, 1.2 m long without a power connector. This product is a stationary single-space electric heater with a nominal heat output of more than 250 W to meet the mandatory ecodesign requirements of Commission Regulation (EU) 2024 / 1103, it must be supplemented by a controller that meets at least the following control functions: TW (0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / For further information and a declaration of the codes of the control functions, see the product data sheet. This product may only be installed by an electric expert and must be put into operation in accordance with the installation and assembly instructions. Only then will the mandatory ecodesign requirements of Regulation (EU) 2024 / 1103 be met. The electric power is responsible for the compliant commissioning. Vitramo is the leading manufacturer and produces wall and ceiling infrared heating exclusively in Germany.