KDT 210, KDT 210 cable exhaust air control with thermal switch

By using the cable air control with the KDT 210 thermocouple, an exhaust system can only be used if the window is open during the oven and the necessary supply air can flow into the room. A magnetic switch on the window wing monitors whether the window is open or closed and sends this information to the control unit via a thin cable. This only releases the power supply when the window is tilted or opened. A thermocouple switch on a free piece of oven tube monitors whether the oven is burning or cold and takes the condition into the safety control of the exhaust air. A window must only be opened when the oven is burning. If the oven is cold, the exhaust air system can be put into operation independently of the window position. The control unit is simply put between the socket and the power supply plug of the extractor hood. The power supply fuse prevents the device from changing the exhaust hood. The control line is clamped to the magnetic switch. Another control line is inserted at the thermocouple. The control line can be conveniently placed in empty pipes and only then mounted on the devices. Second window: The system can be combined with another cable magnetic switch KMS 098K22 for a second window. At least one window must be opened so that the exhaust system can be switched on while the oven is in operation. Technical data: Operating voltage: 230 V / 50-60Hz switching power: 1150 VA / 5 Acontrol voltage: 18 Vcable length: 6 m silicone (extendable) for thermocouple cable length: 6 m (extendable) for cable-magnetic switch function: -15 degrees / + 40 degrees protection: IP 40xXV / 5 control unit (HxBxT): 121x57x46 mm magnetic switch (HxBxT): 55x3x18 mm magnet (HxBxT): 55x15mm (Hxx15mm): 15x15mm (Hx15mm)