PPB 30 O, end-assembly set PPB 30 O object version

Additionally available packaging sizes: 1

Approval and certificates: test report according to EN 13141-8. Registration in TZWL Bulletin. Heat exchangers: With the high-performance heat exchangers and the high-efficiency EC fans, the devices achieve a heat supply level of 73% in the reference volume flow according to EN 13141-8. Mounting instructions: Mounting takes place in 2 steps: installation of the raw shell PP 45 RHK (DN 160) or PP 45 RHL (DN 160) and an external cover in a core hole hole DN 160 with a inclination of 1-2%. We recommend to execute the core drilling with DN 182 and to align the tilt of the sleeve with the attached styrofoam wedges. The raw shell is protected from impurities with plaster cover. Then the integration of the end-assembly set will follow. No pipe installation necessary and no regulation of the plant necessary. Electrical connection: The device is delivered ready for use. Electrical connection is made by means of plug-in connection. Connection to space air control RLS 45 K or RLS 45 O via plug-in control lines. The 12 VDC power line of the space air control RLS 45 K / RLS 45 O for the device is the control line at the same time. Condensate sequence: The condensate is taken from an integrated condensate drop edge in the outer cover. Special characteristics: The PPB 30 O device is a perfect alternative to ensure cost-effective ventilation of the bath with heat recovery. A LowCost solution for the bathroom could be the combination of 1 x PPB 30 O + 1 x RLS 45 O. (Attention: The air control has the protection type IP 00). The exhaust air operation of 45 m3 / h (without heat recovery and without volume current compensation) can also be realized. The PPB 30 O devices are primarily designed for installation in the exhaust air rooms. The IP X4 protection type facilitates the choice of the assembly site in the bathroom. The energy efficiency of the PPB 30 O convinces with a SPI value of 0.19 Wh / m3. Due to the energy-saving engines, a very good sensor-led operation, the devices reach the energy efficiency class of A. The PPB 30 O device can be operated in 5 ventilation levels 5 / 12 / 18 / 22 / 26 m3 / h and 2 operating modes continuous ventilation with heat recovery, cross-ventilation without heat recovery. Flow-optimized external covers in the accessories program keep the exhaust air away from the outside facade. End-assembly set for the PushPull Balanced PPB 30 single-room ventilation unit with two fans, two ceramic heat carriers, internal cover and two integrated filters ISO Coarse 45% (G3), so that the air is filtered in both directions. Necessary accessories: PP 45 RHK or PP 45 RHL, outer cover PPB 30 AK, PPB 30 AE, PPB 30 AW or PPB 30 AS, space air control RLS 45 K or RLS 45 O. With a room air control RLS 45 K or RLS 45 O you can build a cable-connected ventilation system from PPB 30 and PP 45 devices. The maximum number of fans used is 6. Thus different combinations are possible, e.g. 3 x PPB 30 O + 1 x RLS 45 K or 3 x PPB 30 O + 1 x RLS 45 O. Optional accessories: extension set PPB 30 VS, wall block PP 45 MB, balancing frame PPB 30 ARE and PPB 30 ARW, fixing plate PPB 30 ARE BB and PPB 30 ARW BB for balancing frame, humidity sensor PP 45 HYI and PP 45 HY, CO2-PP 45 CO2, VOC-sensor 45 VOC, air filter, PPB 30 G3