PCE-DC 9EV-ICA, EVSE measuring instrument / EVSE measuring pliers PCE-DC 9EV-ICA incl. ISO calibration certificate

EVSE measuring instrument / EVSE measuring pliers PCE-DC 9EV-ICA incl. ISO calibration certificate

EVSE measuring instrument / EVSE measuring trench with a measuring range of 0... 1000 A AC / DC / frequency measurement small and compact construction / on-line measurement / immediately ready for use / 25 mm wide current trench opening / optional with ISO certification The EVSE measuring trench is a measuring instrument for the precise determination of electrical currents. The EVSE measuring device covers a large part of all measurement tasks with a current-line diameter of 25 mm and a measuring range of 0... 1000 A AC / DC. The current measurement is inductively done with the EVSE measuring pliers. This means that the test pieces to be measured do not have to be switched off before. This allows the current to be measured in the current operation. The measured value is shown numerically as well as graphically using a bar diagram. The compact design of the EVSE measuring instrument also allows easy storage of the measuring instrument in working bags. Electromobility is playing a growing role. It is therefore important to know the current flow in the lines. With the EVSE measuring pliers, the wall box of an electric vehicle on the primary and secondary sides can be monitored. In addition, the EVSE measuring instrument can be used in workshops when checking electric vehicles. The starting current of the electric motors or also the on-board current can be tested with the EVSE measuring pliers. In addition to the normal measurement mode, the EVSE can also measure the on-turn current. A switch-on current measurement with the EVSE measuring pliers is especially necessary when driving engines, such as ventilation systems, in order to avoid possible error sources. In addition, the EVSE measuring pliers have a low-pass filter function. This function can be used to determine currents in the low-frequency range. In this process, currents up to a frequency of 1 kHz are measured by the EVSE measuring pliers. The EVSE can be used for the current measurement of the low-voltage, low-voltage, low-voltage, low-voltage, low-voltage, low-voltage, low-voltage, low-voltage, low-voltage, low-voltage, low-voltage, low-voltage, low-voltage, low-voltage, low-voltage, low-voltage, low-voltage, low-voltage, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, low-pressure, The low pass filter refers to a frequency up to 1 kHz Other specifications All the details apply to an environment between 18... 28 ° C, with a numeric view, 30 Hz, with a bargraph operating conditions -10... 50 ° C, < 85% r.F., non-condensing storage conditions -20... + 60 ° C, < 75% r.F., non-condensing maximum height 2000 - 1 / 61mm (2) - 1 / 61mm (2)