PCE-DC 50, power supply PCE-DC 50

Power supply PCE-DC 50

The current clamp is a measuring instrument for measuring currents of up to 1000 A AC / DC. In addition to the current measurement, the current clamp can also measure and test voltage, frequency, touch ratio, resistance, pass test, capacitors and diodes. The closing diameter of the current pliers is 48 mm. Thus you can also perform measurements on lines with a large cross-section. Thanks to the NCVD function, the current pliers can be used to test without contact whether a voltage is connected to a line. This power trench has an integrated Bluetooth interface. This Bluetooth interface can be used to connect to the PC or on the smartphone. This allows the measured data of the current pliers to be stored and analysed. If the PC does not have a Bluetooth interface to connect the power supply, a suitable Bluetooth adapter is already included. Another special feature of the current pliers is the measurement of temperatures. Two different thermocouples type K can be connected to the current pliers and read out at the same time. The temperature can be measured up to 1000 ° C. The case of the current clamp consists of a robust plastic, which is also covered with a rubber. Thanks to the additional gumming, the current clamp also can easily withstand impact. RemarksSamplerate 2 Hz cover on the measuring bushenAC A and AC V MessungBluetooth interface line diameter max. 48 mm temperature measurement over 2 thermocouple automatic disconnection-free voltage detection delivery volume 1 x power supply PCE-DC 50 1 x measurement line set 1 x transport case 1 x PC-software 1 x bluetothadapter 2 x thermocouple type K 1 x 9 V battery